En México: 01800-953-00-93
Correo de Ventas:ventas@mx.omega.com

Thermistor Immersion Probe Ideal for HVAC and Building Management

THM-HVAC-PROBE

Thermistor Immersion Probe Ideal for HVAC and Building Management
 | THM-HVAC-PROBE

MXN1,470.00 A/0.1CP-INW-4-PB

5 años de garantía
  • Thermistor Immersion Probes for commercial HVAC and Building Management Systems
  • Plastic enclosure
  • 1/2" NPS thread
  • Chilled or Hot Water Systems, Boilers, Pumps, Compressors, Chillers
Sondas, elementos y asambleas de termistores - Ver Productos Relacionados

Descripción

The ACI Thermistor Immersion sensor is a single point temperature sensor that is designed for use with electronic controllers in commercial heating and cooling building management systems. They feature a ¼” diameter stainless steel probe and are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture and to increase the response times using high quality, thermally conductive epoxy. The immersion sensors include a standard ½” NPS Male process thread.


Applications: Chilled Water Systems, Hot Water Systems, Boilers, Pumps, Compressor, Chillers


For further information Please visit www.workaci.com

Product specifications

Sensor Type: Thermistor
Sensor Curve: Non-Linear, NTC (Negative Temperature Coefficient)
Number Sensing Points: One
Number Wires: Two (Non-Polarity Sensitive)
Sensor Accuracy: +/-0.2ºC (+/-0.36ºF)
A/10K-E1 Series: +/- 0.3ºC (+/-0.54ºF)
A/1.8K Series: +/-0.5ºC @ 25ºC (77ºF) and (+/-1.0ºC) (+/-1.8ºF)
Response Time (63% Step Change): 10 Seconds nominal
Power Dissipation Constant: 3 mW/ºC
A/1.8K Series: 1 mW/ºC
A/10K-E1 Series: 2 mW/ºC
Operating Temperature Range: -40 to 150ºC (-40 to 302ºF)
Storage Temperature Range: -40 to 85ºC (-40 to 185ºF)
Operating Humidity Range: 10 to 95% RH, non-condensing
Probe Diameter: 0.250" (6.35mm)
Thermowell Material | Bore Diameter: 304 Series Stainless Steel | 0.260"
Probe Diameter: 0.250" (6.35mm)
Probe Material: 304 Stainless Steel
Thermowell Instrument Thread | Process Thread: ½” NPS (National Pipe Straight) Female Thread | ½” NPT (National Pipe Tapered) Male Thread
Fitting Material | Flammability Rating: Polyamide 66 (High Performance Nylon 66) | UL94-HB
Sensor Threads: ½” NPS (National Pipe Straight) Male Thread
Foam Pad Material | Flammability Rating: Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C
Lead Length | Conductor Size: 14” (35.6 cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Rating: Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E)
Conductor Material: Silver Plated Copper
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
A/20K-INW-4-PB
MXN1,085.00
Disponible en: 1 Semana
 
20,000 Ohm Thermistor, Immersion, No Well, 4", Plastic Enclosure
A/AN-INW-4-PB
MXN1,085.00
Disponible en: 1 Semana
 
10,000 Ohm Thermistor (Type III), Immersion, No Well, 4", Plastic Enclosure
A/CP-INW-4-PB
MXN1,085.00
Disponible en: 1 Semana
 
10,000 Ohm Thermistor (Type II), Immersion, No Well, 4", Plastic Enclosure
A/0.1CP-INW-4-PB
MXN1,470.00
Disponible en: 1 Semana
 
High Accuracy 10,000 Ohm Thermistor (Type II), Immersion, No Well, 4", Plastic Enclosure
Todas las cantidades que se muestran en MXN
We noticed you are from the US. Visit your local site for regional offers and live support.