Fine Diameter (0.01 in. - 0.04 in.) Rugged Thermocouple Transition Joint Probes

TJ36 Series - Fine Diameters

Fine Diameter Thermocouple Transition Joint Probes

Ver Todas los Modelos Abajo

HACER PEDIDO

Diameters as small as 0.25mm (0.010") !
Probes Available in E, J, K, N, and T Calibrations
304 SS and Inconel^® 600 sheaths
Additional Sheaths Available: 310 SS, 316 SS, 321 SS, Hastelloy^® X, and Super OMEGACLAD™ XL
Type K and N cand be manufactured with OMEGACLAD™ Compacted Mineral Insulation Cable for Long-Lasting Performance in Harsh Conditions
Spring Strain Relief Prevents "Pinching" of the Wire
1 m (40") Lead Length, Stripped Leads

Sensores - Ver Productos Relacionados

Descripción

OMEGA's fine diameter transition joint thermocouple probes provide durability and fast, accurate temperature measurements. Diameters as small 0.25mm (0.010") allow "pin-point" accuracy of measured values while protecting the measurement junction inside the metal sheathing and mineral insualtion of the OMEGACLAD™ cable . The metal transition barrel provides a solid mounting surface and the PFA insulated lead wire is a cost-effective solution for environmental temperatures to 260°C (500°F). For extended life, low drift operation at higher temperatures, choose Super OMEGACLAD™ XL sheathing, available in Type K and N calibrations.

Calibration ANSI Code	Sheath Materials	Sheath Dia. mm (in.)	T/C Junction Upper Temp. °C (°F)	Model Number (See notes, below)
K CHR- AL	304SS	0.25 (0.010) 0.50 (0.020) 0.80 (0.032) 1.00 (0.040)	500 (932) 700 (1290) 700 (1290) 700 (1290)	TJ36-CASS-010()-() TJ36-CASS-020()-(*) TJ36-CASS-032()-(*) TJ36-CASS-040()-(**)
	Inconel^® 600	0.25 (0.010) 0.50 (0.020) 0.80 (0.032) 1.00 (0.040)	500 (932) 700 (1290) 700 (1290) 700 (1290)	TJ36-CAIN-010()-() TJ36-CAIN-020()-(*) TJ36-CAIN-032()-(*) TJ36-CAIN-040()-(**)
	Super OMEGACLAD™ XL	0.25 (0.010) 0.50 (0.020) 0.80 (0.032) 1.00 (0.040)	600 (1112) 800 (1472) 800 (1472) 800 (1472)	TJ36-CAXL-010()-() TJ36-CAXL-020()-(*) TJ36-CAXL-032()-(*) TJ36-CAXL-040()-(**)
J Iron- Constantan	304SS	0.25 (0.010) 0.50 (0.020) 0.80 (0.032) 1.00 (0.040)	260 (500) 260 (500) 260 (500) 260 (500)	TJ36-ICSS-010()-() TJ36-ICSS-020()-(*) TJ36-ICSS-032()-(*) TJ36-ICSS-040()-(**)
T Copper- Constantan	304SS	0.50 (0.020) 0.80 (0.032) 1.00 (0.040)	260 (500) 260 (500) 260 (500)	TJ36-CPSS-020()-() TJ36-CPSS-032()-(*) TJ36-CPSS-040()-(**)

Notes: *Specify Junction: (G)rounded, (E)xposed or or (U)ngrounded.
**Specify length in inches: 6 for 150 mm (6 in.), 12 for 300 mm (12 in.),
Super OMEGACLAD™ XL probes (highlighted in yellow) are also available in N calibration; substitute "NN" for CA in Model Number.

View the Thermocouple Accuracy and Color Code charts

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

TJ36-CASS-040U-6

MXN1,905.00

Disponible en: Disponible

TJ36 Probe (Type K calibration) with 304SS Sheath,1.00 mm (0.040 in.) dia., 150 mm (6 in.) ength, ungrounded tip

TJ36-CASS-010G-12

MXN3,285.00

Disponible en: Disponible

TJ36 Probe (Type K calibration) with 304 SS Sheath, 0.25 mm (0.010in.) dia., 300 mm (12 in.) length, grounded tip

TJ36-CAIN-032U-6

MXN1,975.00

Disponible en: 3 Semanas

TJ36 Probe (Type K calibration) with Inconel^® Sheath, 0.80 mm (0.032 in.) dia., 150 mm (6 in.) length, ungrounded tip

TJ36-ICSS-040G-12

MXN1,865.00

Disponible en: 3 Semanas

TJ36 Probe (Type J calibration) with 304 SS Sheath, 1.0 mm (0.040 in.) dia., 300 mm (12 in.) length, grounded tip

TJ36-CAXL-032U-12

MXN2,170.00

Disponible en: 3 Semanas

TJ36 Probe (Type K calibration) with Super OMEGACLAD™ XL Sheath, 0.80 mm (0.032 in.) dia., 300 mm (12 in.) length, ungrounded tip

Todas las cantidades que se muestran en MXN
Ejemplo de pedido: (1) TJ36-CAXL-040G-6 Type K Rugged Fine Diameter Thermocouple Transition Joint Probe with PFA Stripped Lead Wire, 1 m (40 inches) length; Super OMEGACLAD™ XL sheath, 1.0 mm (.040 inch) dia., 150 mm (6 inches) length, ungrounded tip, MXN2,065.00

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)		(2)	(3)		(4)	(5)		(6)
TJ		-			-			-

Opciónes de Descripción:

(1) Lead Wire Length seleccionar de:
36 para 36 inches(standard)
CUSTOM para custom length in inches(whole number only up to 600 inches max)

(2) Thermocouple Type seleccionar de:
CA para Type K
CX para Type E
IC para Type J
CP para Type T (Not available with 010 diameter)
NN para Type N (Only available with XL and IN sheath)

(3) Sheath Material seleccionar de:
SS para 304 SS
IN para Inconel®
XL para Super OMEGACLAD™ XL (Only available with Thermocouple Type K and N)

(4) Probe Diameter seleccionar de:
010 para 0.010 in. (0.25 mm)
020 para 0.020 in. (0.50 mm)
032 para 0.032 in. (0.80 mm)
040 para 0.040 in. (1.00 mm)

(5) Junction Type seleccionar de:
E para Exposed
G para Grounded
U para Ungrounded

(6) Length seleccionar de:
6 para 6 in. (150 mm)
12 para 12 in. (300 mm)
CUSTOM para custom length in inches(whole numbers only from 2 to 120 inches)

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos

Productos Relacionados: