Flanged Immersion Heaters for Severe Corrosive Solution

TMIS Series

Ver Todas los Modelos Abajo

HACER PEDIDO

3, 5 & 6 Inch, 150 lb (68 kg) Stainless Steel Flange
Rugged 0.475" Diameter Incoloy Sheath Heating Elements for Use in Severe Corrosive Solutions
240 and 480 V, 3 Phase
2 to 24 kW

Calentadores de inmersión - Ver Productos Relacionados

Descripción

FEATURES
Rugged Construction. Sturdy 0.475" diameter Incoloy elements, welded to stainless steel flanges - corrosion resistance provides superior rigidity and strength. Heavy duty jumper straps and terminal posts assure permanent tightness of connections and an extra margin of current carrying capacity.

APPLICATIONS
For severe corrosive solutions. For solutions with chemicals with more severe corrosive properties than can be used with other sheath materials and where corrosive action is accelerated by higher sheath temperatures. For heavy solution concentrations in the 30 to 50% range. It should be noted that with high concentration, only the less corrosive chemicals may be put in the solution.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.

kW	Circ.	Phase	B Dim. in. (cm)	E1 General Purpose Enclosure¹	Wt. lb (kg)	N³ Dim. in. (cm)
3 Inch-150 Lb. SS Flange, 3 Incoloy Elements — 15 W/in2
2	1	3	18 1/16 (46)	TMIS-3025L/*/3P	16 (7)	1 (2.54)
4	1	3	33 1/16 (84)	TMIS-3045L/*/3P	18 (8)	1 (2.54)
6	1	3	48 1/16 (122)	TMIS-3065L/*/3P	21 (10)	1 (2.54)
5 Inch-150 Lb. SS Flange, 6 Incoloy Elements — 15 W/in2
4	1	3	18 1/16 (46)	TMIS-6045L/*/3P	27 (12)	1 (2.54)
8	1	3	33 1/16 (84)	TMIS-6085L/*/3P	33 (15)	1 (2.54)
12	1	3	48 1/16 (122)	TMIS-6125L/*/3P	37 (17)	1 (2.54)
6 Inch-150 Lb. SS Flange, 12 Incoloy Elements — 15 W/in2
8	1	3	18 (46)	TMIS-1208L/*/3P	60 (36)	1 (2.54)
12	1	3	25 1/8 (64)	TMIS-1212L/*/3P	67 (27)	1 (2.54)
16	1	3	33 (84)	TMIS-1216L/*/3P	76 (34)	1 (2.54)
20	1	3	40 1/2 (103)	TMIS-1220L/*/3P	84 (38)	1 (2.54)
24	1	3	48 (122)	TMIS-1224L/*/3P	111 (50)	1 (2.54)

/* Designate voltage, i.e. insert 240V for 240 V or 480V for 480 V.
Note: Larger flange sizes and kW ratings are available. contact OMEGALUX.
1 Heaters with General Purpose & Moisture Resistant Enclosures are UL Listed and CSA Certified.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

TMIS-6125L-480V/3P

MXN214,810.00

Disponible en: 6 Semanas

Heater, 12 kW, 480 V, incoloy sheath elements, 3 phase

TMIS-3025L/240V/3P

Consultar Ventas

Disponible en:

Heater, 2 kW, 240 V, incoloy sheath elements, 3 phase

TMIS-3125/480V/3P

Consultar Ventas

Disponible en:

Heater, 12kw, 480 V, incoloy sheath elements, 3 phase

Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)	(2)		(3)
TMIS-			L/		/3p

Opciónes de Descripción:

(1) Number of Incoloy Elements seleccionar de:
3 para 3 Incoloy Elements
6 para 6 Incoloy Elements
12 para 12 Incoloy Elements

(2) Wattage seleccionar de:
025 para 2 kW
045 para 4 kW
065 para 6 kW
08 para 8 kW
085 para 8 kW
12 para 12 kW
125 para 12 kW
16 para 16 kW
20 para 20 kW
24 para 24 kW

(3) Voltage seleccionar de:
240V para 240 V
480V para 480 V

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos