Flanged Immersion Heaters for Clean Water

TM Series

Flanged Immersion Heaters

Ver Todas los Modelos Abajo

HACER PEDIDO

Flange Sizes 3" to 5" of High Grade Steel
General Purpose, NEMA 1 Rated Enclosure or Moisture Resistant¹, Explosion Resistant² Enclosure Available
Sturdy 0.475"Diameter Copper Elements
6 to 150 kW
240 and 480 Vac Power, 1 and 3 Phase

Calentadores de inmersión - Ver Productos Relacionados

Descripción

Please note: Approved pressure and/or temperature limited controls must be used to assure safe operation in the event of system malfunctions. See Temperature Section.

APPLICATIONS
For clean water pH 6 to 8 – Clean municipal water such as used in washing, rinsing and industrial processes with a pH factor range of pH 6 to pH 8.

For non-corrosive solutions – Non-corrosive water solutions or weak alkaline or acid content of up to 1% by volume, such as sodium carbonate, sodium chlorate or other neutral salts.

kW	Circ.	Dim. in (cm) B	Wt. Ibs (kg)	E1 General Purpose Enclosure¹		E2 Moisture Res/Explos. Res. Encl²
kW	Circ.	Dim. in (cm) B	Wt. Ibs (kg)	Model No.	Dim. in (cm) N	Model No.	Dim. in (cm) N
3 Inch-150 lb. Steel Flange, 3 Copper Sheath Elements — 45 W/in2
6	1	18 1/16 (46)	16(7)	TM-3065/240V/*	1 (3)	TM-3065E2/240V/*	3/4 (2)
6	1	18 1/16 (46)	16(7)	TM-3065/480V/*	1 (3)	TM-3065E2/480V/*	3/4 (2)
9	1	25 3/16 (64)	17(8)	TM-3095/240V/*	1 (3)	TM-3095E2/240V/*	3/4 (2)
9	1	25 3/16 (64)	17(8)	TM-3095/480V/*	1 (3)	TM-3095E2/480V/*	3/4 (2)
12	1	33 1/16 (84)	18 (8)	TM-3125/240V	11/4 (3)	TM-3125E2/240V	1 (3)
12	1	33 1/16 (84)	18 (8)	TM-3125/240V/3P	1 (3)	TM-3125E2/240V/3P	3/4 (2)
12	1	33 1/16 (84)	18 (8)	TM-3125/480V/*	1 (3)	TM-3125E2/480V/*	3/4 (2)
15	1	40 9/16 (103)	20 (9)	TM-3155/240V	1 (3)	TM-3155E2/240V	1 1/4 (3)
15	1	40 9/16 (103)	20 (9)	TM-3155/240V/3P	11/4 (3)	TM-3155E2/240V/3P	3/4 (2)
15	1	40 9/16 (103)	20 (9)	TM-3155/480V/*	1 (3)	TM-3155E2/480V/*	3/4 (2)
18	1	48 1/16 (122)	21(10)	TM-3185/240V	11/4 (3)	TM-3185E2/240V	1 1/4 (3)
18	1	48 1/16 (122)	21(10)	TM-3185/240V/*	1 (3)	TM-3185E2/240V/3P	3/4 (2)
18	1	48 1/16 (122)	21(10)	TM-3185/480V/*	1 (3)	TM-3185E2/480V/*	3/4 (2)

kW	Circ. & Ph.	Dim. in (cm) B	Wt. Ibs (kg)	E-1 Gen.Purpose Encl¹		E-3 Explosion Res. Encl.²		E-4 Moisture Res. Encl¹
kW	Circ. & Ph.	Dim. in (cm) B	Wt. Ibs (kg)	Model No.	Dim. in (cm) N	Model No.	Dim. in (cm) N	Model No.	Dim. in (cm) N
5 Inch-150 Lb. Steel Flange, 6 Copper Sheath Elements — 45 W/in2
12	1-3	18 1/16 (46)	30(14)	TM-6125/**/3P	1(3)	TM-6125E3/**/3P	1 1/2 (4)	TM-6125E4/**/3P	1(3)
15	1-3	19 3/16 (50)	31(14)	TM-6155/**/3P	1(3)	TM-6155E3/**/3P	1 1/2 (4)	TM-6155E4/**/3P	1(3)
18	1-3	25 3/16 (64)	33(15)	TM-6185/**/3P	1(3)	TM-6185E3/**/3P	1 1/2 (4)	TM-6185E4/**/3P	1(3)
24	2-3	33 1/16 (84)	37(17)	TM-6245/240V/3P	1(3)	TM-6245E3/240V/3P	1 1/2 (4)	TM-6245E4/240V/3P	1(3)
24	1-3	33 1/16 (84)	37(17)	TM-6245/480V/3P	1(3)	TM-6245E3/480V/3P	1 1/2 (4)	TM-6245E4/480V/3P	1(3)
30	2-3	40 9/16 (103)	40(18)	TM-6305/**/3P	1(3)	TM-6305E3/**/3P	1 1/2 (4)	TM-6305E4/**/3P	1(3)
40	2-3	52 1/16 (132)	51(23)	TM-6405/**/3P	1(3)	TM-6405E3/**/3P	1 1/2 (4)	TM-6405E4/**/3P	1(3)
60	2-3	78 1/16 (198)	77(35)	TM-6605/480V/3P	1(3)	TM-6605E3/480V/3P	1 1/2 (4)	TM-6605E4/680/3P	1(3)

/* Add the suffix “/3P” to the model number for 3 phase power.
/** Specify voltage, i.e., 240V for 240 VAC or 480V for 480 VAC.
Note: Larger flange sizes and kW rating available. Please contact OMEGALUX for specific details.
1 Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2 Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

TM-3065/240V/3P

Consultar Ventas

Disponible en:

Heater, 3 copper sheath elements, 6 kW, 240 V, 3 phase

Ordenar Por Número de Parte

Número de parte

Cant.

Número de parte

Cant.

Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)	(2)	(3)		(4)	(5)
TM-				/

Opciónes de Descripción:

(1) Number of Copper Sheath Elements seleccionar de:
3 para 3 Copper Sheath Elements
6 para 6 Copper Sheath Elements

(2) Wattage seleccionar de:
065 para 6 kW
095 para 9 kW
125 para 12 kW
155 para 15 kW
185 para 18 kW
245 para 24 kW
305 para 30 kW
405 para 40 kW
605 para 60 kW

(3) Enclosure seleccionar de:
Nada (dejar el campo en blanco) para E-1 General Purpose Enclosure
E2 para E-2 Moisture Resistant/Explosion Resistant Enclosure
E3 para E-3 Explosion Resistant Enclosure
E4 para E-4 Moisture Resistant Enclosure

(4) Voltage seleccionar de:
240V para 240 V
480V para 480 V

(5) Power seleccionar de:
Nada (dejar el campo en blanco) para 1 Phase Power
/3P para 3 Phase Power

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos