En México: 01800-953-00-93
Correo de Ventas:ventas@mx.omega.com

Radio Telemetry System for Strain Gages, Thermocouples and Voltage Signals

TX20B

Radio Telemetry System for Strain Gages, Thermocouples and Voltage Signals | TX20B

Ver Todas los Modelos Abajo

1 año de garantía CE
  • Eliminates Cumbersome Slip Ring Installation
  • Does Not Require FCC License
  • Small Size, Light Weight
  • Wireless Sensor Interface
  • Battery Powered or Induction Powered Models Available
Accesorios - Ver Productos Relacionados

Descripción

OMEGA's TX20B radio telemetry system is ideal for transmitting signals from sensors which are mounted on rotating shafts. The TX20B series miniature transmitters modulate sensor signals from thermocouples, voltage transducers, or strain gage bridge circuits onto a RF carrier and transmit them to a stationary receiver. The RX20B receiver demodulates the signal and converts it into a ±2 volt analog output. Two analog outputs signals are available simultaneously. A wide band output provides frequency response from dc to 1250 Hz. For maximum stability of the signal a filtered output is also available with a 0-10 Hz band width.
TX20B transmitters incorporate a crystal oscillator which is tuned to a specific frequency eliminating the need for tuning by the operator. Transmitter frequencies can be staggered allowing multiple transmitters to be operated in close proximity with no interference. Multi-channel receivers are available.
Transmitters are small enough in size to be taped or strapped to the rotating shaft and can be powered by a 9 V battery. For applications where continuous uninterrupted monitoring is necessary an inductively coupled power supply and transmitter are also available.
The TX20B operates in a band which does not require an FCC license.
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
TX20B-S1
Consultar Ventas  
Disponible en: 
 
 
0.3 mV/V Strain gage transmitter
TX20B-S2
Consultar Ventas  
Disponible en: 
 
 
1.0 mV/V Strain gage transmitter
TX20B-S3
Consultar Ventas  
Disponible en: 
 
 
2.0 mV/V Strain gage transmitter
TX20B-S4
Consultar Ventas  
Disponible en: 
 
 
3.0 mV/V Strain gage transmitter
TX20B-E1
Consultar Ventas  
Disponible en: 
 
 
0.1V Voltage transmitter
TX20B-E2
Consultar Ventas  
Disponible en: 
 
 
1.0V Voltage transmitter
TX20B-E3
Consultar Ventas  
Disponible en: 
 
 
5.0V Voltage transmitter
TX20B-E4
Consultar Ventas  
Disponible en: 
 
 
10.0V Voltage transmitter
TX20B-J1
Consultar Ventas  
Disponible en: 
 
 
-17 to 93°C (0 to 200°F) Type J T/C transmitter
TX20B-J2
Consultar Ventas  
Disponible en: 
 
 
-17 to 204°C (0 to 400°F) Type J T/C transmitter
TX20B-J3
Consultar Ventas  
Disponible en: 
 
 
-17 to 427°C (0 to 800°F) Type J T/C transmitter
TX20B-J4
Consultar Ventas  
Disponible en: 
 
 
-17 to 538°C (0 to 1000°F) Type J T/C transmitter
TX20B-K1
Consultar Ventas  
Disponible en: 
 
 
-17 to 260°C (0 to 500°F) Type K T/C transmitter
TX20B-K2
Consultar Ventas  
Disponible en: 
 
 
-17 to 538°C (0 to 1000°F) Type K T/C transmitter
TX20B-K3
Consultar Ventas  
Disponible en: 
 
 
-17 to 816°C (0 to 1500°F) Type K T/C transmitter
TX20B-K4
Consultar Ventas  
Disponible en: 
 
 
-17 to 1093°C (0 to 2000°F) Type K T/C transmitter
Accessories (Clamp assemblies)
TX-ICA-100
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 25.4 (1) shafts, inductive
TX-ICA-125
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 31.8 (11.4) shafts, inductive
TX-ICA-150
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 38.1 (11.2) shafts, inductive
TX-ICA-175
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 44.5 (13.4) shafts, inductive
TX-ICA-200
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 50.8 (2) shafts, inductive
TX-ICA-250
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 63.5 (21.2) shafts, inductive
TX-ICA-300
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 76.2 (3) shafts, inductive
TX-ICA-400
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 101.6 (4) shafts, inductive
TX-ICA-500
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 127.0 (5) shafts, inductive
TX-ICA-600
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 152.4 (6) shafts, inductive
TX-BCA-100
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 25.4 (1) shafts, Battery Power
TX-BCA-125
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 31.8 (11.4) shafts, Battery Power
TX-BCA-150
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 38.1 (11.2) shafts, Battery Power
TX-BCA-175
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 44.5 (13.4) shafts, Battery Power
TX-BCA-200
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 50.8 (2) shafts, Battery Power
TX-BCA-250
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 63.5 (21.2) shafts, Battery Power
TX-BCA-300
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 76.2 (3) shafts, Battery Power
TX-BCA-400
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 101.6 (4) shafts, Battery Power
TX-BCA-500
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 127.0 (5) shafts, Battery Power
TX-BCA-600
Consultar Ventas  
Disponible en: 
 
 
Clamp assembly for 152.4 (6) shafts, Battery Power
{divder}
Consultar Ventas  
Disponible en: 
 
 
Receivers
RX20B-M
Consultar Ventas  
Disponible en: 
 
 
Receiver for battery-powered systems
RX20B-I-M
Consultar Ventas  
Disponible en: 
 
 
Receiver for induction-powered systems
SL20
Consultar Ventas  
Disponible en: 
 
 
Stationary loop for induction-powered systems
RX24B-BP
Consultar Ventas  
Disponible en: 
 
 
4-channel plug-in receiver backplane
RX28B-BP
Consultar Ventas  
Disponible en: 
 
 
8-channel plug-in receiver backplane
RX22
Consultar Ventas  
Disponible en: 
 
 
Plug-in receiver module (battery transmitter)
RX22-I
Consultar Ventas  
Disponible en: 
 
 
Plug-in receiver module (induction transmitter)
Todas las cantidades que se muestran en MXN

Generador de Número de Parte

Construya su Número de Parte Abajo
Opciónes de Descripción:


(1) Input Types and Ranges seleccionar de:
S1 para Strain gage transmitter with 0.3 mV/V input range
S2 para Strain gage transmitter with 1.0 mV/V input range
S3 para Strain gage transmitter with 2.0 mV/V input range
S4 para Strain gage transmitter with 3.0 mV/V input range
E1 para Voltage transmitter with 0.1 V input range
E2 para Voltage transmitter with 1.0 V input range
E3 para Voltage transmitter with 5.0 V input range
E4 para Voltage transmitter with 10.0 V input range
J1 para Type J T/C transmitter with 0-200 °F input range
J2 para Type J T/C transmitter with 0-400 °F input range
J3 para Type J T/C transmitter with 0-800 °F input range
J4 para Type J T/C transmitter with 0-1000 °F input range
K1 para Type K T/C transmitter with 0-500 °F input range
K2 para Type K T/C transmitter with 0-1000 °F input range
K3 para Type K T/C transmitter with 0-1500 °F input range
K4 para Type K T/C transmitter with 0-2000 °F input range
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos
We noticed you are from the US. Visit your local site for regional offers and live support.