En México: 01800-953-00-93
Correo de Ventas:ventas@mx.omega.com

STANDARD TERMINAL BLOCK RELAYS

XRU1D Series

STANDARD TERMINAL BLOCK RELAYS | XRU1D Series

STANDARD TERMINAL BLOCK RELAYS

MXN1,195.00 XRU1D24

CE
  • Pluggable Relay Allows for Field Replacement
  • Functional Plug-In Bridges
  • Screw Connections
  • LED Status Indication
  • DIN Rail Mount
  • Only 6.2 mm (0.24") Wide
  • All Common Input Voltages Between 24 Vdc to 120 Vac
  • NEMA 6 (IP67) Protection
  • Environmentally Friendly, Cadmium-Free Contact
  • Easy, Cost-Effective and Replacement Using Engagement Lever
Relés y temporizadores - Ver Productos Relacionados

Descripción

Application Description
Used in automation systems, electromechanical relays guarantee a safe connection between process I/O and electronic controls. The following functions are covered by relay coupling elements:
• Electrical isolation between the input and output circuits
• Independence of the type of switching current (AC and DC)
• High short-term overload resistance in the event of short circuits or voltage peaks
• Low switching losses
• Ease of operation

Accessories
Power Terminal Block
The XRAPLCESK power terminal block has the same shape as the relay modules and is used to feed in the bridging potentials. The nominal current is 32 A. When the total current is less than or equal to 6 A, supply can take place directly at the connecting terminal blocks of one of the connected relays.

End Cover
The XRAATPBK end cover is required at the start and stop of a relay strip. It can also be used for visual separation of groups of relays as well as separating relays with voltages greater than 250V and separating neighboring bridges with different potentials. It is equipped with pre-scored break out points at the bridging positions so that individual bridges can be passed through as needed. It may also be necessary to use the end cover between adjacent relays when three phases (L1, L2, L3) are used on the contact side of the relay.

Bridges
The XRAFBST colored, insulated plugin bridge system reduces wiring time by up to 70% compared to conventionally wired relays. The XRAFBST2, 2-position bridges, are suited for bridging a smaller number of relays and total currents <6 A. When a circuit is supplied from both sides, the circuit can be opened at any point, allowing all other modules to continue being supplied at the same time. The XRAFBST500 allow up to 80 modules to be bridged at one time. If bridges with different potentials meet in neighboring modules, the end cover XRAATPBK should be used. All bridges are equipped with a groove for removal with a standard screwdriver.

SPECIFICATIONS
Input Voltage:
   XRU1D24: 24 Vdc
   XRU1D24U: 24 Vac/Vdc
   XRU1D120U: 120 Vac/110 Vdc
Typical Input Current:
   XRU1D24: 9 mA
   XRU1D24U: 11 mA (24 Vac), 8.5 mA (24 Vdc)
   XRU1D120U: 3.5 mA (120 Vac), 3 mA (110 Vdc)
Connection Type: Screw connection
Rigid Solid AWG (mm2): 26 to 14 (0.14 to 2.5)
Flexible Stranded AWG (mm2): 26 to 14 (0.14 to 2.5)
Typical Response Time:
   XRU1D24: 5 mS
   XRU1D24U and XRU1D120U: 6 mS
Typical Release Time:
   XRU1D24: 8 mS
   XRU1D24U and XRU1D120U: 15 mS
Input Protection:
   XRU1D24: Polarity protection diode, free-wheeling diode
   XRU1D24U and XRU1D120U: Bridge rectifier
Contact Type: SPDT
Contact Material: AgSnO
Max Switching Voltage: 250 Vac/Vdc1
Min Switching Voltage: 12 Vac/Vdc
Limiting Continuous Current: 6 A
Min Switching Current: 10 mA
Min Switching Power: 120 mW
Ambient Temp Range: -20 to 60°C (-4 to 140°F)
Rated Operating Mode: 100% operating factor
Inflammability Class: V0, in accordance with UL 94
Mechanical Service Life: 2 x 107 cycles
*The separating plate, XRAPLCESK, should be installed for voltages greater than 250V (L1, L2, L3) between identical terminal points of adjacent modules. Potential bridging is then possible with the XRAFBST bridge system.
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Cant.
Descripción
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloXRU1D120U
XRU1D120U
MXN1,110.00
Disponible en: Disponible
 
SPDT relay, 120 Vac/110 Vdc coil voltage
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloXRU1D24
XRU1D24
MXN1,195.00
Disponible en: Disponible
 
SPDT relay, 24 Vdc coil coltage
  
XRU1D24U
MXN1,385.00
Disponible en: Disponible
 
SPDT relay, 24 Vac/Vdc coil voltage
REPLACEMENT RELAYS AND ACCESSORIES
  
XRR1D120U
MXN670.00
Disponible en: Disponible
 
Replacement relay for XRU1D120U
  
XRR1D24
MXN435.00
Disponible en: Disponible
 
Replacement relay for XRU1D24 and XRU1D24U
  
XRAPLCESK
MXN1,045.00
Disponible en: Disponible
 
Power terminal block
  
XRAATPBK
MXN88.00
Disponible en: 7 Semanas
 
Black end cover
  
XRAFBST2RD
MXN61.00
Disponible en: 7 Semanas
 
2-position red snap in jumper
  
XRAFBST2BU
MXN61.00
Disponible en: 7 Semanas
 
2-position blue snap in jumper
  
XRAFBST2GY
MXN61.00
Disponible en: 7 Semanas
 
2-position gray snap in jumper
  
XRAFBST500RD
MXN930.00
Disponible en: 7 Semanas
 
80-position red snap in jumper
  
XRAFBST500BU
MXN930.00
Disponible en: 7 Semanas
 
80-position blue snap in jumper
  
XRAFBST500GY
MXN930.00
Disponible en: 7 Semanas
 
80-position gray snap in jumper
  
XBMZB6
MXN26.50
Disponible en: 7 Semanas
 
6.2 mm white blank marker strip
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloXBANS3575P
XBANS3575P
MXN510.00
Disponible en: Disponible
 
DIN rail, 35mm x 7.5mm x 2m, slotted
  
XBANS3575U
Consultar Ventas  
Disponible en: 
 
 
DIN rail, 35mm x 7.5mm x 2m, solid
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloXBANS3515P
XBANS3515P
Consultar Ventas  
Disponible en: 
 
 
DIN rail, 35mm x 15mm x 2m, slotted
  
XBANS3515U
MXN935.00
Disponible en: Disponible
 
DIN rail, 35mm x 15mm x 2m, solid
  
XBANS3575PL
MXN835.00
Disponible en: Disponible
 
DIN rail, 35mm x 7.5mm x 2m, slotted, aluminum
Todas las cantidades que se muestran en MXN
Ejemplo de pedido: (1) XRU1D120U SPDT relay, 120 Vac/110 Vdc coil voltage, MXN1,110.00
We noticed you are from the US. Visit your local site for regional offers and live support.