En México: 01800-953-00-93
Correo de Ventas:ventas@mx.omega.com

Wall-Mount Programmable Temperature Controller

CN1511 Series

Wall Mount Temperature Controller | CN1511 Series

Wall Mount Temperature Controller

Ver Todas los Modelos Abajo

2 años de garantía
  • Large, 7-Digit, 7-Segment LED Display 20 mm (0.8") H
  • Multiple Control Modes —On/Off, PID, Heat/Cool
  • 10-Segment Ramp/Soak Program
  • 5 Independent Ramp and Soak Programs
  • Programmable Control Parameters
  • Thermocouple, RTD, and Thermistor Temperature Inputs
  • Current, Voltage, and Millivolt Process Inputs
  • Scaling for Voltage, Current, and Millivolt Signals
  • 4 Programmable Process Alarms (Optional)
  • Relay or Solid State Outputs (Optional)
  • Built-In Buzzer to Sound Alarm (Optional)
  • 2 Programmable Timers (Optional)
  • Easy to View from a Distance
  • Protection from Dust and Moisture
Controladores de temperatura y proceso y dispositivos de conmutación de potencia - Ver Productos Relacionados

Descripción

Housed in a wall-mount, watertight plastic enclosure, the CN1511 is a flexible temperature controller that offers the ease of an on/off controller with the precision of a full-blown PID controller. For applications that do not require the complexity of PID control, this device can be programmed to work as simple on/off controller. Yet for processes that require close temperature conformity, the CN1511 can be run under full PID control, selectable for either heating (direct acting) or cooling (reverse acting).

The CN1511 accepts 5 different ramp and soak programs, each with up to 10 segments. Separate pass-codes are required for selecting or entering a ramp/soak program. This prevents operators from making any inadvertent changes. The manual hold feature allows for an indefinite hold anywhere along the ramp/soak profile. Also offered is a manual setpoint entry mode for a quick ramp-to-setpoint function. This eliminates the need to enter a complete ramp/soak program.

Maximum and minimum temperature readings are continuously tracked, and 4 optional process alarms are available. These are programmable over the entire range of the selected input type. They can be configured as latching or non-latching, normally open, or normally closed. There are also 2 optional timers that work independently or in conjunction with process limits (e.g., turning on a fan 10 minutes after limit 1 temperature is reached). The time function keeps track of process run time.

The CN1511 also functions as a rate monitor, indicating instantaneous as well as average rate of temperature change. A programmable time base allows the rate to be displayed in per second, minute, hour, or any other interval. The CN1511 can also be programmed for a rate alarm, which can indicate whether a predetermined rate is exceeded or not achieved.

Additional features include a built-in buzzer that sounds whenever a limit is reached (available with the relay option). Visual indication of relay output status is given by LEDs on the front panel. The CN1511 also has a power line filter, designed to provide trouble-free operation in harsh industrial environments.


SPECIFICATIONS
Input Type:
. J, K, T, E, R, S, B, thermistor
2252 . @ 25°C (77°F), Pt100 RTD
. 0 to 10 Vdc
. 4 to 20 mA loop current
. 0 to 100 mV
CJC Error: ±0.5°C @10 to 45°C
(±0.9°F @ 50 to 113°F)
Accuracy:
Resolution: 1°C/°F for T/Cs and
RTDs; 0.1°C/0.2°F for thermistors
Process: 9999, 999.9, 99.99, 9.999
Voltage: 0.05% FS
Current: 0.05% FS
A/D Conversion:
20,000 count A/D converter
Conversion Rate: 7/s (typical)
Display:
Red 7-segment LED display,
20 mm (0.8") H
Display Test: 8.8.8.8.8.8.8. on power-up
Power Options:
120 Vac (60 Hz)—standard
220 Vac (50 Hz)—optional
15 Vdc @ 900 mA—optional
Scale:Programmable from 1 to 30000
Offset:
0.00 to 20.00 (current input),
0.000 to 10.000 (voltage input),
0.00 to 100.00 (millivolt input)
Rate: 0 to 500 seconds
Prop. Band: 0 to 100% of span
Reset: 0 to 50 repeats/min
On/Off Deadband (Programmable):
0 to full scale
Control Output: 5 Vdc drive @ 50 mA
max (internal 5 Vdc source)
Output (Optional):
1. Open collector—6 open-collector
outputs, maximum sink capability
50 mA per output (internal source)
2. Relays—SPST; 1 A @ 28 Vdc
or 0.5 A @ 120 Vac resistive
Output Termination:
Euro-style pluggable connector
Rate: Variable, displayed as rate
change/time base
Enclosure Dimensions:
Case: 192 W x 160 H x 103 mm
(7.55 x 6.29 x 4.05")
Material:
Polystyrene with crystal-clear
polycarbonate lid
Ingress Protection:
Up to IP65 (DIN standard)
Weight:1.4 kg (3 lb)
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Cant.
Descripción
  
CN1511RTD-2
Consultar Ventas  
Disponible en: 
 
 
Wall-mount temperature controller, RTD input, 8-15 Vdc
  
CN1511TH
Consultar Ventas  
Disponible en: 
 
 
Wall-mount temperature controller, thermistor input
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloCN1511TC
CN1511TC
MXN16,435.00
Disponible en: Disponible
 
Wall-mount temperature controller, thermocouple input
  
CN1511TC-2
Consultar Ventas  
Disponible en: 
 
 
Wall-mount temperature controller, 8-15 Vdc
  
CN1511TC-4
MXN21,095.00
Disponible en: 4 Semanas
 
Wall-mount temperature controller, thermocouple input, 6 open collector outputs
  
CN1511TC-3
Consultar Ventas  
Disponible en: 
 
 
Wall-mount temperature controller, thermocouple input, 6 relay outputs
Todas las cantidades que se muestran en MXN
Nota: Comes with watertight connectors (2) and complete operator’s manual.

Generador de Número de Parte

Construya su Número de Parte Abajo
Opciónes de Descripción:


(1) Input Code seleccionar de:
TC para J K T E Thermocouple input
RTD para Pt100 Ohm input
TH para Thermistor input
R para R Thermocuple input
S para S Thermocuple input
B para B Thermocuple input
P para 0 to 100 mV input
V para 0 to 10 Vdc inout
C para 4 to 20 mA

(2) Power Options seleccionar de:
Nada (dejar el campo en blanco) para Std 120 Vac
-1 para 240 Vac
-2 para 8 to 15 Vdc

(3) Output Options seleccionar de:
Nada (dejar el campo en blanco) para Std 5 Vdc drive @ 50 mA max
-3 para 6 relay outputs - 4 alarms 2 timers
-4 para 6 open-collector outputs 4 alarms - 2 timers
Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos
We noticed you are from the US. Visit your local site for regional offers and live support.