iS8 & iS32 Strain & load cell PID controllers

CNiS8 & DPiS8 Series

^MXN13,540.00 DPiS8

HACER PEDIDO

High Quality
FREE 5-Year Warranty
High Accuracy 0.03% Rdg
User-Friendly, Simple to Configure
Free Software

Instrumentación para la medición de presión y tensión - Ver Productos Relacionados

Descripción

For our newest line of controllers with Modbus connectivity, expanded ramp and soak programs, universal inputs, and simple PC programming, visit our CNPT Series.

The OMEGA™ iS32 and iS8 are 1/32 and 1/8 DIN size (96 x 48 mm) Digital Panel Meters featuring the big iSeries color-changing display. The digits are twice the size of typical 1/8 DIN panel meters. The iSeries meters feature the only LED displays that can be programmed to change color between GREEN, AMBER, and RED at any set point or alarm point.

These series is available as an extremely accurate programmable digital panel meter with no outputs or with dual outputs for controlling or alarming functions. Other options include isolated programmable analog output, serial communications and Ethernet. If Modbus is required, we recommend our latest Platinum controllers - CNPT Series. The user can easily program the device for any control or alarming requirement from simple on-off to full autotune PID with a choice of Form C SPDT relays, Solid State Relays, DC pulse, and Analog (voltage and current) outputs.

Fully Isolated Analog Output for retransmission of the process value is available in addition to the control and alarm relays (specify model CNi8A33). The controller covers a broad selection of transducer and transmitter inputs with two input models:

The UNIVERSAL TEMPERATURE & PROCESS instrument (model "i") handles ten common types of thermocouples, multiple RTD's, and several Process (DC) Voltage and Current ranges.
This model also features built-in excitation, 24 Vdc @ 25 mA. With it's wide choice of signal inputs, this model is an excellent choice for measuring or controlling temperature with a thermocouple, RTD, or 4-20 mA transmitter.

The STRAIN & PROCESS instrument (model "iS") measures inputs from Load Cells, Pressure Transducers, and most any strain gauge sensor as well as Process Voltage and Current ranges. The "iS" has built-in 5 or 10 Vdc excitation for bridge transducers, 5 Vdc@ 40 mA or 10 Vdc @ 60 mA. (Any excitation voltage between 5 and 24 Vdc is available by special order). This "iS" model supports 4 and 6 wire bridge configurations, ratiometric and non-ratiometric measurements. The "iS" features fast and easy "in process" calibration/scaling of the signal inputs to any engineering units. This model also features 10 Point Linearization which allows the user to linearize the signal input from extremely nonlinear transducers of all kinds.

Hacer Pedido(Especifique el Número de Modelo)

Número de parte/Desc.

Cant.

Descripción

CNiS833-C24

MXN19,870.00

Disponible en: 6 Semanas

1/8 DIN i Series strain gage controller with two Form "C" mechanical relays, RS-232 & RS-485 communications and 90-240 Vac/dc power

DPiS8

MXN13,540.00

Disponible en: 6 Semanas

1/8 DIN i Series strain gage meter with 90-240 Vac/dc power

DPiS32-C24

MXN13,780.00

Disponible en: 6 Semanas

1/32 DIN i Series strain gage meter with RS-232 & RS-485 communications and 90-240 Vac/dc power

DPiS8-DC

MXN14,965.00

Disponible en: 6 Semanas

1/8 DIN i Series strain gage meter with 24 Vac or 12-36 Vdc power

Todas las cantidades que se muestran en MXN
Nota: Transducer excitation not available on models with serial communications ("-C24") option or low voltage power option ("-DC").

Generador de Número de Parte

Construya su Número de Parte Abajo

	(1)	(2)	(3)	(4)	(5)
CNiS

Opciónes de Descripción:

(1) Size seleccionar de:
32 para 1/32 Din
8 para 1/8 DIN

(2) Control Outputs #1 seleccionar de:
2 para Solid State Relay/0.5 A at 120/240 Vac continuous
3 para SPDT Relay
4 para Pulsed 10 Vdc at 20 mA
5 para Analog Output 0 to 10 Vdc

(3) Control Outputs #2 seleccionar de:
2 para Solid State Relay/0.5 A at 120/240 Vac continuous
3 para Relay SPDT 3A at 120/3 A at 240 Vac
4 para Pulsed Driver 10 Vdc at 20 mA /for use with external SSR

(4) Serial Communications seleccionar de:
Nada (dejar el campo en blanco) para Standard Unit
-C24 para Isolated RS-232 and RS-485 300 to 19.2 k baud (no excitation voltage with C24 option)

(5) Power Supply seleccionar de:
Nada (dejar el campo en blanco) para Standard Power (90 to 240 Vac/dc @ 50 to 400 Hz)
-DC para Low Voltage Power (24 Vac or 12 to 36 Vdc power - no excitation with this option)

Nota: Todas las combinaciones pueden no ser válidas, revise la hoja de especificaciones para números de parte válidos

Manuales de Productos:

Descarga CNiS8 - i Series Controller Quick Start Manual

Descarga CNiS - Process/Strain Gauge Controller Manual

Descarga DPiS8C - Quick Start Manual Compact Process & Strain Gauge Monitor

Descarga DPiS8, DPiS16, DPiS32 Series - Process/Strain Gauge Monitor Manual

Descarga DPiS8 Series - i Series Monitor Quick Start Manual

Descarga CNiS8 - i Series Controller Quick Start Manual

Descarga CNiS - Process/Strain Gauge Controller Manual

Descarga DPiS8C - Quick Start Manual Compact Process & Strain Gauge Monitor

Descarga DPiS8, DPiS16, DPiS32 Series - Process/Strain Gauge Monitor Manual

Descarga DPiS8 Series - i Series Monitor Quick Start Manual