Linear pattern precision pre wired gages with
minature and medium length grids
are for general purpose and stress
analysis applications. Available
with either two 1-meter leads or
three 3-meter leads and 120 Ω or
350 Ω resistance. All models are
compensated for steel.
The planar XY pattern (0 / 90°) allows
precision strain measurement by
eliminating the errors often
associated with a stacked XY
pattern. These gages are available
with either two 1-meter leads or
three 3-meter leads per grid and
are compensated for steel.
The planar rosette pattern (0 / 45°/ 90°) allows
precision strain measurement
by eliminating the errors often
associated with a stacked pattern.
These gages are available with
either two 1-meter leads or three
3-meter leads per grid and are
compensated for steel.
Specifications See Spec Sheet for full specifications Strain Gage Construction Foil strain gage with embedded measuring grid Measuring Grid Material Constantan Thickness µm (microinch) 3.8 or 5 (150 or 197), depending upon strain gage type Carrier Material Polyimide Thickness µm (microinch) 45 ± 10 (1.772 ± 394) Connections PTFE wire, Ø - 0.051 mm², approximately 50 mm long, connected to AWG 28 ribbon cables (PVC insulated) through solder sleeves in 2- or 3-wire configurations Nominal Resistance Ω 120 or 350 depending upon gage Resistance Tolerance % ±0.35, with 0.6 mm and 1.5 mm grid length % ±1 Gage Factor approximately 2 (stated on package) Gage Factor Tolerance % ±1, with 0.6 mm and 1.5 mm grid length % ±1.5, temperature coefficient of gage factor 1/K [1/°F] (115 ± 10) x 10-6 [(64 ± 5.5) x 10-6, nominal value of gage factor temperature coefficient Specified on each package Applicable Bonding Materials Cold Cure Adhesives SG496, SG401 Heat Cure Adhesives TT300
Todas las cantidades que se muestran en MXN Nota: * See Specifitions for Maximum permitted bridge energizing voltage (Vrms) Ejemplo de pedido: (1) KFH-3-350-D16-11L1M2S Package of 10 gages with 3 mm X-Y grid, 350 Ω, 2-leads, 1 m long, MXN11,660.00 plus (1) KFH-3-350-D16-11L1M2S Package of 10 gages with 3 mm X-Y grid, 350 O, 2-leads, 1 m long, MXN11,660.00, MXN11,660.00 + 11,660.00 = MXN23,320.00