|
|
 |
|
|
|
High Temperature Dry Block Calibrator
 |
| Click for larger image. |
|
|
|
|
| • |
Wide Temperature Range 400 to 1200ºC (752 to 2192ºF)
|
| • |
Simple to Use
|
| • |
Highly Accurate Entire Range and Excellent Stabilties
|
| • |
Calibrates Thermocouples and RTD’s
|
| • |
Multi-Hole Insert Block
|
| • |
Interchangeable Test Wells
|
| • |
Rapid Heating/ Cooling Rates
|
| • |
Rugged Case with Carry Handle
|
| • |
RS232 Communications Standard
|
| • |
Free Software
|
| • |
NIST Certificate Included
|
View related products - Precision Calibration Equipment and Ice Point References
|
| |
|
|
|
 |
The CL1201 is designed to provide
very accurate and repeatable
thermal calibration between 400°C
and 1200°C for a wide variety of
thermocouples and other
temperature sensors in industries
such as glass manufacture, power
generation, automotive and material
processing. This rugged,
economically priced portable
thermocouple dry block calibrator is
supplied with a NIST traceable
certificate. The unit provides
excellent stabilities to within ±0.1°C
and has display accuracy of better
than ±3°C between 400 and 1200°C.
The CL1201 block calibrator utilizes
a special heater design for optimum
temperature uniformity and rapid
heating rates. The heating system
consists of heater elements
embedded in lightweight vacuum formed
ceramic fiber moldings which
allows faster heating rates and
extends the working life above other
ceramic tube designs which have
heater elements wrapped around a
ceramic tube. An isothermal block
assembly is machined from a
special alloy giving excellent
thermal conductivity and also resists
high temperature oxidation.
This block is designed to optimize
performance between sufficient
mass for good stability and uniformity
and to have a low enough mass to
have rapid heating/cooling rates and
short stabilization periods. RS232
communications is standard.
SPECIFICATIONS
Minimum Temperature: 400°C (752°F)
Maximum Temperature: 1200°C (2192°F)
Display Accuracy: ±3°C (±6°F)
Temperature Uniformity: ±0.2°C (±0.4°F)
Temperature Stability: ±0.2°C (±0.4°F) at 1200°C (2192°F) after 20 mins
Display Resolution: 0.1° to 999.9 then 1° to 1200°C
Selectable: °C or °F
Heating Rate: 100 to 1200°C, 20 min
Cooling rate: 1200 to 200°C, 140 min
Fan Cooling: Automatic
Power: 120 Vac, 50/60 Hz 230 Vac, 50/60 Hz, 1600 W
Large Insert Size: 34 D x 155 mm Deep (1.33 x 6.10")
Dimensions: 350 H x 198 W x 279 mm D (13.8 x 7.8 x 11.0")
Weight: 10 kg (22 lb)
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with software, hard carrying case, and operator’s manual.
|
|
|
|
|
| |
|
Back to top
|
|
|
