|
E57 Series Inductive Proximity Sensors |
|
|
|
|
|
|
|
2-Wire, 3-Wire, DC, and AC/DC Multiple Range Sensor Models
|
|
Manufactured to Take Physical and Environmental Abuse
|
|
Designed with Stainless Steel Barrel and New Potting Compound for Robust, High Temperature, High Pressure Washdown, as Well as Intense Shock and Vibration Applications
|
|
Unmatched High Noise Immunity Eliminates Problems Associated with Electrical Noise (All Models >20V/Meter)
|
|
360° Output Status Indicator is Visible from Any Angle and in Any Light Condition
|
|
Resettable Short Circuit Protection and Reverse Polarity in Select Models
|
|
Wide Temperature Range -25 to 70°C (-13 to 158°F) on Cable, Micro-Style Connections
|
|
| |
|
|
|
The E57 Series is no longer available. Please refer to our
Proximity Sensors
as an alternative .
The Cutler-Hammer® Premium+ Series
inductive proximity sensors have improved
sensing performance, product durability and
selection. This improved line of sensors
carries the Premium+ Series name because
we have upgraded the design to a rugged
stainless steel body, shock resistant front
caps and impact absorbing potting
compound. Also, the Premium+ Series line
now includes a choice of AC/DC and
DC-only, 12, 18 and 30 mm sensors with
unmatched noise immunity of greater than
20V/meter.
SPECIFICATIONS
E57 PREMIUM+ SERIES
| 2-WIRE SENSORS AC/DC | 3-WIRE DC SENSORS |
Operating Voltage | 40 to 250 Vac/20 to 250 Vdc | 6 to 48 Vdc |
Maximum Load Current | 250 mA @ 25°C 200 mA @ 70°C | 500 mA @ 6 to 30 Vdc |
Switching Frequency | 60 Hz | 12 mm: 1000 Hz; 18 mm: 800 Hz; 30 mm: 500 Hz |
Leakage Current | ≤2.0 mA | ≤100 µA |
Voltage Drop | ≤12V @ <10mA ≤4V @ > 25mA | ≤2.5V |
Holding Current | 5 mA min | – |
Burden Current | – | ≤10 mA |
Protection | Resettable short circuit overload protection | Auto reset |
Switching Hysteresis | <15% rated sensing distance |
Repeat Accuracy | Shielded Models: <1% sensing distance; Unshielded and extended range: <3% |
Time Delay Before Availability | <200 mS |
COMMON SPECIFICATIONS |
Output Indicator LED | 360° viewable LED |
Operating Temperature | -25 to 70°C (-13 to 158°F) |
Enclosure Ratings | NEMA 4, 4X, 6, 6P, 12 and 13 (IP67) |
Shock | 30g, 11 mS per IEC 68-2-76 |
Vibration | 10 to 55 Hz, 1 mm amplitude |
Housing Material | Stainless steel; Polcarbonate end bells; Ryton® front ends |
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: 1 For cable lengths longer than 2m (6'), add the number of the desired length in meters to the end of the listed model number (for model numbers ending with a number, add an "S" and then the length). Example for a 5 m cable: E57LAL12A2 becomes E57LAL12A2S5. 2 Avoid wiring these AC/DC models in series as the sensors may not perform reliably. Contact OMEGA’s Applications Engineering with questions.
Ordering Example: (1) E57SAL18A2 18mm (0.7, USD$5,145.00
|
|
|
|
|
| |
Related Links -
Related Products
|
Related Products |
|
|
|
|
1240i: |
Programmable Step Motor Indexer/Drive |
|
|
|
3540i: |
Programmable Step Motor Indexer/Drive |
|
|
|
ST Series: |
High Performance Stepper Drives With Advanced Features And Control Options |
|
|
|
STAC6 Series: |
High Performance Stepper Drives with Integrated Power Supply |
|
|
|
|
iPROX: |
2-wire AC and 3-wire DC Inductive Proximity Sensors |
|
|
|
PRX102: |
Proximity Sensors - Discontinued
|
|
|
|
|
|
|