TEL: 01-800-099-0420 (In México) | 001-203-359-7577 (Outside México)
 Accessibility  Skip navigation  Site Map  Help  Search field  View shopping cart  View shopping cart  Skip to Navigation
Home >> Flow and Level Produ... >> Turbine, Paddle Whee... >> Paddlewheel Sensors,... >> FP1400 Series

DIGITAL PLASTIC PADDLEWHEEL FLOWMETERS

FP1400 Series   
1 year warranty CE
 
Digital Plastic Paddlewheel Flowmeters
FP1400 Series:DIGITAL PLASTIC PADDLEWHEEL FLOWMETERS
Click for larger image.
   
Polypropylene or PVDF Models
29 Engineering Units (Including User Defined)
Two Programmable Totalizers
Programmable Alarms
Isolated Analog 0 to 5 Vdc or 4 to 20 mA
RS232 Communications Standard
Local Key Pad and 2 x 16 Characters LCD Display
Free Communication Software with Data Logging Capability

View related products - Turbine, Paddle Wheel & Positive Displacement Flow Meters

Click to scroll below to order See Specs PDF Manuals Related Items View a printer friendly page

FP1400 Series flowmeters support various functions including; two independently programmable flow totalizers, user programmable low, high or range flow and temperature alarm, two sets of user programmable optically isolated outputs, self diagnostic alarm, and flow pulse output. The flow rate can be displayed in 29 different volumetric or mass flow engineering units. Flowmeter parameters and functions can be programmed locally via optional key pad and LCD or remotely via the RS232/RS485 interface. Local 2 x 16 LCD readout with adjustable backlight provides flow rate, temperature, total volume reading in currently selected engineering units, diagnostic events indication and feature a password protected access to the process parameters to ensure against tampering or resetting. Liquid flowing through the unit causes the paddlewheel to spin. As the magnets embedded in the paddle spin past the sensor, electrical pulses are produced in which frequency is proportional to the flow rate. The number of pulses per desired time interval and the Kfactor (number of pulses/gal) make it is possible to calculate the flow rate and volume passing through the unit. On board CPU and signal conditioner circuitry perform accurate flow and total computation, digital communication and analog 0 to 5 Vdc or 4 to 20 mA output signals. Non-volatile memory stores all hardware specific and user programmable variables, including flow linearization table.

SPECIFICATIONS
Viscosity: 1 cSt (water) can be used for liquids up to 50 cSt with field calibration (max flow range may be affected) Flow Accuracy (Including Linearity): ±1% of FS
Repeatability: ±0.25% of FS
Temperature Measurement Range: 60°C (140°F)
Temperature Accuracy (Including Linearity): ±0.5°C
Flow Response Time: Approx 1 sec (above 10% of full scale flow), approx 2 seconds (below 10% of full scale flow)
Max Pressure: 10 bar (150 psig)
Max Pressure Drop: @ 15 psi for sized units @ 20 psi all other sizes
Ambient Temperature: -10 to 60°C (14 to 140°F)
Output Signals: Linear 0 to 5 Vdc (3000 Ù min load impedance); linear 4 to 20 mA (500 Ù maximumloop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output)
Flow Pulse Output: 3.3 Vdc amplitude (3000 Ù min load impedance)
Optically Isolated Outputs: UCE 40 Vdc, ICE 150 mA
Power: 11 to 26 Vdc, 100 mV max peak to peak output noise
    Consumption: +12 Vdc (150 mA max); +24 Vdc (100 mA max); circuit board have built-in polarity reversal protection, 300 mA resettable fuse provide power input protection
Communications: RS232 standard, RS485 (optional)
Electrical Connections: Built-in female 12-pin M16, NEMA 4X (IP67) connector. To be mated with 12-pin M16 male EMI shielded NEMA 4X (IP67) connector (sold separately)
Display: Optional local 2 x 16 characters LCD with adjustable backlight (2 lines of text)
Keypad: Optional 4 pushbutton key pad
CE Compliant: EMC Compliance with 89/336/EEC as amended. Emission
Standard: EN 55011:1991, Group 1,
Class A Immunity Standard: EN
55082-1:1992 Wetted Materials Polypropylene Models
Body: Polypropylene
LID: Acrylic
Paddlewheel: PVDF
Shaft: Nickel tungsten carbide
Bearings: Sapphire jewels
O-Rings: EPDM
RTD: 316 SS casing PVDF Models
Body: PVDF
LID: PVDF
Paddle Wheel: PVDF
Shaft: Zirconia ceramic
Bearings: Sapphire jewels
O-RINGS: PTFE
RTD: 316 SS casing


To Order (Specify Model Number)    
 Part Number   Availability   Price   Description    Qty.
 FP1402 6 Weeks   29,485.00    Polypropylene flowmeter, with display  
 FP1404 6 Weeks   29,485.00    Polypropylene flowmeter, with display  
 FP1406 6 Weeks   27,910.00    Polypropylene flowmeter, with display  
 FP1408 6 Weeks   29,485.00    Polypropylene flowmeter, with display  
 FP1412 6 Weeks   40,525.00    PVDF flowmeter, with display  
 FP1414 6 Weeks   40,525.00    PVDF flowmeter, with display  
 FP1416 6 Weeks   40,525.00    PVDF flowmeter, with display  
 FP1418 6 Weeks   40,525.00    PVDF flowmeter, with display  
 Accessories
 FP1400-CABLE 4 Weeks   6,840.00    12 pin 2 m (6') shielded cable  
All dollar amounts on this site are shown in US currency.

 Note: Comes complete with operator’s manual. For units with RS485 communications in place of RS232 add suffix “-485” to the model number, no additional charge.

 Related Links - Related Products
 Related Products
CL535 CL535:
Frequency Calibrator with Totalizer
   

   Back to topBack to top




MMV | 6 | 020