The FPDM3000 Series positive
displacement oval gear flowmeters
are affordable and accurate. One
primary feature is the ability to
maintain consistent accuracy
despite changing viscosity
conditions. The meter’s solid
construction and excellent dynamic
response are well suited to the
measurement of many viscus
fluids. Three choices of wetted
material combinations are available
for compatibility with a large variety
of liquids. Since there is no need
for straight run piping upstream or
downstream of the flowmeter, the
FPDM3000 flowmeters are simple
to use and to install. The meter has
good resolution and high accuracy
at low flow rates.
Specifications Accuracy: ±1% of reading Repeatability: ±0.03% Fitting Type NPT: Female BSP: “-BSP” option DIN: “-DIN” option JIS: “-JIS” option ANSI: “-ANSI” option Total: Resettable Accumulated-Total: Non-resettable Minimum Viscosity: 1cPs Maximum Viscosity: 1000 cPs standard Strainer Size: 200 mesh (74ì) Mounting: Shafts must be in a horizontal plane Mounting: Pipe Liquid Temperature: -40 to 80°C (-40 to 176°F); -40 to 120°C (-40 to 248°F) (“-HT” option) Maximum Pressure: 3400 kPa (500 psi)
† All dollar amounts on this site are shown in US currency.
Note: For units that totalize in Liters connections add “-L” to the model number no additional charge.
For units with BSP connections add “-BSP” to the model number no additional charge.
For units with DIN flanges add “-DIN” to the model number for an additional charge.
For units with JIS flanges add “-JIS” to the model number for an additional charge.
For units with ANSI flanges add “-ANSI” to the model number for an additional charge.
For FPDM3200/FPDM3300 units with high viscosity rotors add “-HV” to the model number for an additional charge.
For FPDM3200 units made for higher temperatures add “-HT” to the model number for an additional charge.