|
|
|
|
|
|
USD$7,430.00
LVF-210A-R
|
|
Pulsed, Infrared Light Excitation (Leak Detection Solution)
|
|
SPST Relay Standard
|
|
Impervious to Most Ambient Light Conditions
|
|
Mounted any Orientation, Wet or Dry
|
|
Nema 6 (IP68) Submersible Sensor and Cable
|
View related products - Level Switches & Transmitters
|
| |
|
|
|
The LVF-200A-R Series optic
sensor creates a pulsed beam of
infrared light which is reflected on
the oblique flat sensor tip. If the tip
is dry, the light beam is recognized
and if it is wet, the beam reflects
back into the liquid. The optic sensor
is factory calibrated for use with
clear or translucent liquids. The
shape and optic characteristics
of the oblique flat optical surface
provide a high level of optical
efficiency, including resistance
to ambient light and process
condensation. Although the sensor
offers very broad liquid compatibility,
it is not recommended for use with
coating or highly specular liquids.
Ideal for leak detection.
Specifications
Accuracy: ±1 mm (0.04") in water
Repeatability: ±0.5 mm (0.02") in water
Operating Principle: Pulsed, infrared light beam
Voltage Input: 12 to 36 Vdc @25 mA
Relay: 60 VA, 1 A maximum
Switch Mode: Selectable, SPST, NO or NC states
Wetted Materials: Polypropylene (PP) or Perfluoroalkoxy (PFA)
Loop Resistance: 600 Ω @ 24 Vdc
Maximum Pressure Rating PP: 150 psi @ 25°C (76°F) derated @ 1.667 psi per °C above 25°C (76°F)
Maximum Temperature Rating: -40 to 90°C (-40 to 194°F)
Enclosure Rating: NEMA 6 (IP68) submersible sensor and cable
Cable Length: 3 m (10') 4 conductor shielded
Max. Cable Length: 305 m (1000')
Dimensions: 7.6 or 11.4 L x 2.7 cm Dia (3.0 or 4.5 x 1.05") ¾ NPT or ¾ G
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with operator’s manual.
|
|
|
|
|
| |
|
Back to top
|
|
|