|
|
|
|
|
|
|
V/Hz Control: Provides 150% Starting Torque and Advanced Low Speed Control
|
|
Easy to Understand Keypad
|
|
RS485 Serial Communication Port
|
|
Single-Phase or 3-Phase Input Capability on 115/240 Vac Rated Units
|
View related products - Drives & Motors
|
| |
|
|
|
The NFX9000 adjustable
frequency AC Drives are designed to provide adjustable
speed control of 3-phase motors. These
microprocessor-based drives have standard
features that can be programmed to tailor
the drive’s performance to suit a wide variety
of application requirements. The NFX9000
volts-per-hertz product line utilizes a 32-bit
microprocessor and insulated gate bipolar
transistor (IGBTs) which provides quiet
motor operation, high motor efficiency and
smooth low speed performance. The size
and simplicity of the NFX9000 make it ideal
for hassle-free installation where size is a
primary concern.
Models rated at 240V, single- or
3-phase, 50/60 Hz are available in sizes
ranging from 1/4 to 2 hp. Models rated at
115V, single-phase, 50/60 Hz are available
in the 1/4 to 1/2 hp size range. The standard
drive includes a digital display as well as
operating and programming keys on a
removable keypad. The display provides
drive monitoring and diagnostic information.
The keys are utilized for digital adjustment
and programming of the drive plus operator
control. Separate terminal blocks for control
and power wiring are provided for customer
connections. The drives feature RS485 serial
communications.
SPECIFICATIONS
OUTPUT RATINGS
Horsepower: 90 to 132V, 1/4 to 1/2 hp,
200 to 240V, 1/2 to 2 hp
Frequency Range: 0.1 to 400 Hz
Overload Rating: 150% for 60 sec
Frequency Resolution: Digital, 0.1 Hz
Frequency Accuracy:
Digital: ± 0.01% of max frequency
Analog: ± 0.2% of max frequency
Undervoltage Carryover Limit: 0.3 to 25 sec
MOTOR PERFORMANCE
Motor Control: V/Hz
Constant Torque: Standard
Speed Regulation: 0.5% of base speed
INPUT POWER
Voltage: 50/60 Hz, ±3 Hz
100 to 120V: -10% +10%/1-phase
200 to 240V: -10% +5%/1-phase
200 to 240V: -10% +5%/3-phase
Displacement Power Factor: Better than 0.95
Efficiency: Typically greater than 95%
DESIGN TYPE
Microprocessor: 32-bit
Converter Type: Diode
Inverter Type: Insulated Gate Bipolar Transistor
Waveform: PWM V/Hz
ENVIRONMENT
Operating Temperature: -10 to 40°C (14 to 104°F)
Humidity: 20 to 90% non-condensing
Maximum Elevation: 1000 m (3281')
CODES AND STANDARDS
NEMA, IEEE, NEC: Design standards, UL listed, cUL listed, CE marked
Standard Enclosure: Protected chassis (IP20)
PROTECTIVE FEATURES
Ground Fault: Standard
Overload Protection: Standard
Overcurrent: Standard
Overvoltage: Standard
Undervoltage: Standard
Overtemperature: Standard
Overload Limit: Standard
SET UP ADJUSTMENTS, PERFORMANCE FEATURES, OPERATOR CONTROL AND EXTERNAL INTERFACE
Keypad:
Alphanumeric Display: Standard, 1 x 4 character
Digital Indications: RUN/STOP and FORWARD/REVERSE
Diagnostics: Last 3 trips with cause
LED Status Indicators: 4; RUN/STOP and FORWARD/REVERSE
Operator Functions: RUN/STOP, speed control (digital or potentiometer), RESET, MODE keys and ENTER
I/O TERMINAL BLOCK
Analog Inputs: 1 Input, 0 to 10 Vdc, 4 to 20 mA
Potentiometer: 1 to 2K Ω
Analog Voltage: Nominal 10 Vdc, 10K Ω input impedance
Analog Current: Nominal 4 to 20 mA, 250 Ω
Digital Inputs: 4 programmable inputs
Digital Outputs: 1 form A relay contact
PROGRAMMABLE PARAMETERS
Out of the Box: Factory settings loaded for quick start-up
Acceleration and Deceleration: 2 separately, adjustable linear or S curve times, 0.1 to 600 sec
DC Injection Braking:
External Fault: Terminal input
Jog: Terminal input
Fault Reset: STOP/RESET or terminal input
I/O: NO/NC selectable
Jump Frequencies: 3, with adjustable width
Parameter Security: Programmable
software lock
Preset Speeds: 2 preset speeds
Reversing: Keypad or terminal
Speed Setting: Keypad, terminal or pot
RUN/STOP Control: Keypad or terminal
Stop Modes: Decel, coast or DC injection
RELIABILITY
Pretested Components: Standard
Surface Mount Technology: Standard, PCBs
Computerized Testing: Standard
Final Test with Full Load: Standard
Engineering Systems and Service: National network of AF drive specialist
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes with operator’s manual.
|
|
|
|
|
| |
Related Links -
Manual, Related Products
|
Product Manual |
Download NFX Series - AC Motor Drives Quick Start |
Download NFX Series - AC Motor Drives User Manual |
Related Products |
|
|
|
OMDC-PU-E Series: |
AC or DC Motor Speed Sensors from 1- 20 pulses per revolution to monitor speed and direction. |
|
|
|
|
OME Series: |
General Purpose AC Motors, Industrial Duty Three-Phase |
|
|
|
|
|
HW7000 Series Hook Up Wire 600 V, 1000V (MIL): |
Hook Up Wire Irradiated PVC Insulation preffered wire for soldering applications; abrasion and cut resistant, used in military harnessing, medical electronics and power lead supply.
|
|
|
|
|
|
|