|
|
 |
|
|
|
RTD Probe with Insulated Wire and Shrink-Tube Support
 |
| Click for larger image. |
|
|
USD$4,455.00
PR-10E-3-100-1/8-6
|
| • |
Low temperature range: -50 to 250°C (-58 to 482°F)
|
| • |
High temperature range: -50 to 450°C (-58 to 842°F)
|
| • |
Extreme temperature range: -200 to 600°C (-328 to 1112°F)
|
| • |
Class A accuracy conforming to IEC 60751
|
| • |
Standard probe lengths: 2, 3, 4, 6, 9, 12, 18 and 24 in.
|
| • |
2, 3, and 4-wire lead wire styles
|
| • |
PT100 and PT1000 RTD element
|
| • |
Stripped-end leads with other cold-end termination options
|
| • |
Dual element offered on 1/4 in. diameter probes only
|
View related products - RTD (PT100) Probes, Elements and Assemblies
|
| |
|
|
|
 |
The PR-10 series has been updated with low, high, and extreme temperature ranges; all of the new models will be PR-10(L,H,E)*. The older models have been discontinued.
Omega's RTD probe with insulated lead wire has a shrink-tube strain relief support at the sheath/wire transition to provide wire flexibility and durability. This 316 stainless steel probe is offered in 2-, 3-, or 4-wire configuration. This is available in three temperature ranges covering -200°C to 600°C (-328 to 1112°F) to accommodate your specific temperature needs. Applications for this probe include liquid immersion, slurries and emulsions, granular material measurements, as well as temperature monitoring of heat bars, kilns, and pipes.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
|
|
|
|
Part Number Builder |
|
|
Option Descriptions
|
|
(1)
|
RANGE
|
| |
Select
L for L=LOW (-50 to 250°C)
H for H=HIGH (-50 to 450°C)
E for E=EXTREME (-200 to 600°C)
|
(2)
|
NUMBER OF WIRES
|
| |
Select
2 for 2 WIRE
3 for 3 WIRE
4 for 4 WIRE
|
(3)
|
OHMS
|
| |
Select
100 for 100 OHMS
1000 for 1000 OHMS
|
(4)
|
SHEATH DIAMETER
|
| |
Select
1/8 for 1/8" DIAMETER
3/16 for 3/16" DIAMETER
1/4 for 1/4" DIAMETER
|
(5)
|
SHEATH LENGTH
|
| |
Select
2 for 2 INCHES
3 for 3 INCHES
4 for 4 INCHES
6 for 6 INCHES
9 for 9 INCHES
12 for 12 INCHES
18 for 18 INCHES
24 for 24 INCHES
|
(6)
|
COLD END TERMINATION
|
| |
Select
Nothing(leave field blank) for stripped leads
-RDXL6SD-CONN for connector for RDXL6SD datalogger
-TA3F for 3-pin DIN connector
-TA4F for 4-pin DIN connector
-HH804-CONNECTOR for DIN connector for use with HH-804 RTD meter
-LUG for Spade Lugs
-MTP for 3-pin mini connector
-OTP for 3-pin standard connector
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | | | |
|
|
|
| |
|
Back to top
|
|
|
