|
|
| PX01 with Protection Head |
|
 |
|
|
|
|
|
|
|
|
| • |
0.05% Linearity
|
| • |
Lightning Protectred Junction Box
|
| • |
5-Point NIST Traceable Calibration Provided
|
| • |
All Stainless Steel Construction
|
| • |
Double Diaphragm Design for Harsh Environments
|
| • |
Available in Gage, Absolute, Sealed Gage, psi and Metric Ranges
|
| • |
Optional Pressure Ports to Fit Most Industrial Applications
|
View related products - Pressure Transducers
|
| |
|
|
|
 |
OMEGA's PX01 Series transducers
are very high-accuracy industrial
pressure transmitters. The all
stainless steel construction
and hermetically sealed case
make them suitable for harsh
environments. They are true high accuracy
devices, with a "double
diaphragm" design for high reliability
in industrial areas. A broad
temperature-compensated range of
16 to 71°C (60 to 160°F) and a high
operating range to 121°C (250°F)
make these transducers very stable
in applications with fluctuating
temperatures. The PX01 is available
in gage, absolute, or sealed models
as well as in psi or metric ranges.
NPT and 7/16-20 O-ring seal fittings
are available for industrial and
hydraulic applications.
SPECIFICATIONS
4 to 20 mA
Excitation: 12 to 40 Vdc
Output: 4 to 20 mA ±10% adj
Zero Balance: +4 mA +10% -2% adj
Linearity: ±0.05% FS
Hysteresis: ±0.05% FS
Repeatability: ±0.05% FS
Sensing Element: 4-active-arm bridge, using thick-film strain gages in a hermetically sealed “double diaphragm” chamber (except gage units)
Operating Temp Range: -46 to 121°C (-50 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Span: 0.003% FS/°F
Zero: 0.003% FS/°F
Proof Pressure: 150% of rated pressure
Burst Pressure: 300% of rated pressure
Wetted Parts: 17-4 PH stainless steel
Pressure Port: Ranges <10,000 psi: 7/16-20 UNF female; also available: 1/4-18 NPT M/F; ranges ≥10,000 psi = 9/16-18, 1/4" HP tube
Electrical Connection: Lightning protected amplifier housing
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: 2 and 5 psi Ranges available only on amplified output. 1/4 HP Tube Fitting supplied for ranges 10,000 psi and above.
|
|
|
|
Part Number Builder |
|
|
Option Descriptions
|
|
(1)
|
Pressure Fitting
|
| |
Select
C for 1/4-18 NPT-M
D for 1/4-18 NPT-F
J for 7/16-20 UNF-M
K for 7/16-20 UNF-F
S for 1/4 HP Tube Fitting
|
(2)
|
Electrical Termination
|
| |
Select
0 for 10 foot cable
1 for PT1H-10-6P connector (mating connector sold separately)
5 for Lightening protected amplifier box (4-20 ma only)
|
(3)
|
Pressure Range (PSI)
|
| |
Select
002 for 0-2 psi
005 for 0-5 psi
010 for 0-10 psi
015 for 0-15 psi
020 for 0-20 psi
025 for 0-25 psi
050 for 0-50 psi
075 for 0-75 psi
100 for 0-100 psi
150 for 0-150 psi
200 for 0-200 psi
250 for 0-250 psi
300 for 0-300 psi
500 for 0-500 psi
750 for 0-750 psi
1K for 0-1000 psi
1.5K for 0-1500 psi
2K for 0-2000 psi
3K for 0-3000 psi
3.5K for 0-3500 psi
5K for 0-5000 psi
7.5K for 0-7500 psi
10K for 0-10000 psi
20K for 0-20000 psi
30K for 0-30000 psi
|
(4)
|
Units
|
| |
Select
A for Absolute Pressure
G for Gage Pressure
S for Sealed Gage Pressure
|
(5)
|
Output
|
| |
Select
V for mV/V Output
5T for 0-5 Volt Output
5Z for Isolated 0-5 Volt Output
10T for 0-10 Volt Output
I for 4-20 mA Output
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | | |
|
|
|
| |
| Related Links -
Related Products
|
| Related Products |
 |
DP24-E: |
| 1/8 DIN Economical Process Meter - Discontinued |
|
|
|
|
 |
DP41: |
| 1/8 DIN High Performance Temperature, Process and Strain Meter |
|
|
|
|
|
|
