The PX2310 offers the user
unprecedented flexibility allowing
field selection of range, type of
output and field zeroing. The user
can also select which port is hi and
lo via jumpers. The 4-digit display
can also be set to read either line
pressure or differential pressure.
The entire package is rugged cast
aluminum with a NEMA 4 rating
and the solid state sensor offers
excellent accuracy, stability, and low
long term drift.
SPECIFICATIONS Accuracy RSS Ranges A, B & C: ±1.0% Full Scale; Range D: ±2.0% RSS full scale Storage Temperature: -20 to 85°C (-4 to 185°F) Operating Temperature: -20 to 85°C (-4 to 185°F) (Limits of Electronics only) Compensated Range: 0 to 54°C (32 to 130°F) Zero Shift (Over Compensated Range): 2.0% full scale Span Shift (Over Compensated Range): 2.0% full scale Response Time: 1 to 5 seconds, selectable Proof Pressure: 2.2 x full scale Burst Pressure: 40 x full scale Vibration: 10 g from 50 to 2000 Hz Shock: 200 g Excitation: 12 to 30 Vdc @ 5 mA (typical)/18 to 28 Vac 40 mA (typical) (reverse polarity protected) Output User Selectable: Voltage: 0 to 5 Vdc, 0 to 10 Vdc, 1 to 5 Vdc 3-wire system Current: 4 to 20 mA 2-wire system (0 to 1000 Ω load) Minimum Supply Voltage: Vdc = 12 + 0.2 x loop resistance Maximum Supply Voltage: Vdc = 30 + 0.004 x loop resistance Electrical Connection: ½ in conduit Pressure Connection: 1/8 -18 NPT internal Sensor Cavity Volume: 0.2 cc Case: Die cast aluminum, powder coated Environmental Protection: NEMA 4 Wetted Parts: 17-4 PH stainless steel (not recommended for hydrogen) Dimensions: 102 L x 152 W x 51 mm diameter (4.0 x 6 x 2")
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with operator’s manual. Ordering Example: (1) PX2310-100DX wet /wet differential transducer with six selectable ranges, USD$32,580.00
