|
|
| PXM5500 Series, mV/V Output |
|
 |
|
|
|
|
 |
OMEGA’s PXM5500 Transducer Series provides high performance in demanding industrial and research applications where accuracy, reliability, and price are important. This transducer has a 10-year MTBF rate and is stable to 0.1% of FS over an 18 month period. This translates into less down time, fewer test reruns, more time between calibrations, and high confidence in your pressure data. When recalibration is impossible, relying on the high stability of the PXM5500 Series transducer may be the only cost-effective way to obtain pressure data over the long term. OMEGA’s thin film technology makes this premium in a performance possible. The strain gauges and associated structures are sputter-deposited directly onto the pressure sensing element thus eliminating the need for adhesives. The resulting molecular bond between the sensing element and the strain gauges ensures virtually no shifting, drifting, or creep in the performance of the transducer. The micro-geometry design of the PXM5500 sensing element results very small, low mass sensor that reduces effects of mechanical vibration and shock. The PXM5500 gives you the accuracy, reliability, and stability at competitive prices.
The PXM5500 is also available in standard/Imperial configurations, with MS33656-4, MS33649-4, 1/4 NPT or 1/8 NPT ports, and models from 0-15 to 0-10,000 psi pressure ranges.
Please see the PX5500 for complete details, or contact our Pressure department for more information..
SPECIFICATIONS
Excitation: 10 Vdc
Output FSO: 30 mV typ, 26 mV min
Input Resistance: 2500 Ω typical, 800 Ω min, 3000 Ω max.; For 350 Ω bridge models see Custom Configurations.
Output Resistance: 2500 Ω typical, 800 Ω minimum, 3300 Ω maximum
Insulation Resistance: 500 MΩ @ 45 Vdc over the compensated range
Sensing Element: 4-active-arm bridge using sputter-deposited thin-film elements
Accuracy: Combined linearity, hysteresis and nonrepeatability: ±0.10% FSO (BFSL) <70 bar; ±0.15% FSO, 70 bar and above
Calibration Stability: ±0.1% for 18 months
Vibration Sensitivity: At 35 g peak sinusoidal vibration from 10 Hz to 2000 Hz (1/2" D.A.), the output shall not exceed 0.04% FSO/g for 1 bar range, decreasing to 0.003% FSO/g for 70 bar and above
Natural Frequency: 5 kHz for 15 psi, increasing logarithmically to 50 kHz for 300 bar
Shock: Qualification level of 100 g, 11 ms half sine wave without damage
Electrostatic Discharge (ESD): Protected to 15 kV
Operating Temp Range: -54 to 150°C (-65 to 300°F)
Compensated Temp Range: -18 to 82°C (0 to 180°F)
Thermal Effects:
Span: ±0.0025% FSO/°F
Zero: ±0.0025% FSO/°F
Proof Pressure: 2 times rated pressure or 1,000 bar, whichever is less, will not cause changes in performance beyond the specified tolerance
Burst Pressure: 3 times rated pressure or 1,300 bar, whichever is less, will not cause rupture of the pressure containment cavity
Wetted Parts: 17-4 PH or 15-5 PH SS
Electrical Connection: PTIH-10-6P standard; see custom configurations
Pressure Port: G1/4 or G1/8, male or female
Mating Connector: PTS06A-10-6S (sold separately)
Weight: 200 g (7 oz) maximum
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: To order Absolute Pressure models, change "G" in the part number to "A". No charge.
To order Sealed Gauge models, change "G" in the part number to "S". No charge.
|
|
|
|
Part Number Builder |
|
|
Option Descriptions
|
|
(1)
|
Pressure Port
|
| |
Select
MA for G 1/8 male
MB for G 1/8 female
MC for G 1/4 male
MD for G 1/4 female
|
(2)
|
Electrical Connection
|
| |
Select
0 for 0.6 meter shielded cable
1 for PT1H-10-6P connector or equivalent (mating connector sold separately)
6 for micro DIN connector
|
(3)
|
Pressure Range (Bar)
|
| |
Select
001 for 0 to 1 Bar
1.60 for 0 to 1.6 Bar
004 for 0 to 4 Bar
006 for 0 to 6 Bar
010 for 0 to 10 Bar
016 for 0 to 16 Bar
025 for 0 to 25 Bar
040 for 0 to 40 Bar
060 for 0 to 60 Bar
100 for 0 to 100 Bar
160 for 0 to 160 Bar
250 for 0 to 250 Bar
400 for 0 to 400 Bar
600 for 0 to 600 Bar
|
(4)
|
Pressure Units
|
| |
Select
A for Absolute pressure
G for Gauge pressure
S for Sealed gauge pressure
|
(5)
|
Output
|
| |
Select
V for 3 mV/V nominal
5T for 0 to 5 Vdc
I for 4 to 20 mA
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | | |
|
|
|
| |
| Related Links -
Related Products
|
| Related Products |
|
|
 |
DP41: |
| 1/8 DIN High Performance Temperature, Process and Strain Meter |
|
|
|
|
|
|
