|
|
|
|
|
|
|
|
Precision Micromachined Silicon Sensor
|
|
5-Point NIST Traceable Calibration
|
|
Lightning/Surge Protection Available on Amplified Models
|
|
316L SS Case and Diaphragm
|
|
Fused Polyurethane Cable
|
|
mV/V, 0-10 Vdc, or 4-20 mA Output
|
|
Premium Temperature Performance
|
|
Broad Compensated Temperature Range
|
|
0.20% Standard Accuracy or Optional 0.08% High Accuracy Models for Precise Depth Measurement
|
|
Available in Gage Pressure: Vented to Atmosphere Through the Cable; Sealed Gage: Not Vented to Atmosphere; or Absolute Pressure: Vacuum Reference
|
|
Reverse Polarity Protected
|
|
Protective Nose Cone and Desiccant Available
|
|
Standard or Custom Cable Lengths
|
View related products - Pressure Transducers
|
| |
|
|
|
The PXM709GW Series submersible depth transducers are designed
to make precision level or depth measurements in fresh water or
liquids compatible with 316 SS reliably for years in harsh industrial
environments. Applications include Level Monitoring and Control,
Depth Measurement, Surface Water Monitoring, Tank Level, Well
Water Depth, Waste Water Applications,Dewatering Installations
and Construction Bypass.
Inconel® models are also available for oceanic research and
highly corrosive or salt water applications. Consult Sales for
availability.
The PXM709 series has the proven Omega micromachined
silicon technology as its core sensor. The Piezoresistive
technology uses precision solid state strain gages molecularly
embedded into a highly stable silicon wafer. The silicon is
mounted in a sealed chamber and protected from the
environmental fluids by a pressure sensitive stainless steel
diaphragm. A very small volume of silicone oil transfers the
pressure from the diaphragm to the silicon sensor. The cable is
molded onto the case using a unique high pressure, high
temperature system to assure the best possible quality seal for
long life and durability. This technology produces a very rugged,
high stability sensor with exceptional accuracy, minimal thermal effects
and long term reliability.
COMMON SPECIFICATIONS
Approvals: RoHS compliant
Accuracy (Combined Linearity, Hysteresis and Repeatability): Standard ±0.20% BSL or high accuracy, option “HH”, ±0.08% BSL
Setting Accuracy Zero: ± 0.5% full scale typical, ± 1.0% full scale maximum (± 1.0% full scale typical, ± 2.0% full scale maximum for ranges = 170 mb)
Setting Accuracy Span: ± 0.5% full scale typical, ± 1.0% full scale maximum (± 1.0% full scale typical, ± 2.0% full scale maximum for ranges = 170 mb) calibrated in vertical direction with fitting down
Minimum Resistance Between Transducer Body and Any Wire: 100M Ω @ 50 Vdc (before surge protection)
Pressure Cycles: 1 million minimum
Long Term Stability (1 Year.): ±0.1% full scale typical
Operating Temperature: -18 to 79°C (0 to 175°F) with no solid freeze
Compensated Temperature: -1 to 32°C (30 to 90°F)
Thermal Effects (Over Compensated Range):
Zero Balance:
Ranges >350 mb: ±0.3% span
Ranges ≤350 mb: ±0.5% span
Span Setting:
Ranges >350 mb: ±0.3% span
Ranges ≤350 mb: ±0.5% span
Bandwidth: DC to 1 kHz typical
Response Time: 500 usec, 0 to 90% step change
CE Compliant: Meets EN 61326-1: 2006 for industrial locations [certified with 91 m (300')]
Lightning Protection Option (if included): Integral lightning surge protection to IEC-61000-4-5 (Level 4)
Shock: 50 g, 11 ms, half-sine horizontal and vertical axis
Vibration: ± 20 g
Overpressure
Gage and Sealed Gage:
25 mb: 10 times span
70 mb: 6 times span
170 mb to 70 bar: 4 times span
Absolute: 350 mba: 6 times span ranges
>350 mba: 4 times span
Containment Pressure
Gage Pressure:
25 to 350 mb: To 70 bar
1 to 70 bar: To 200 bar
Absolute Pressure: 350 mb to 70 bar: To 400 bar
Wetted Parts: 316L stainless steel
Body Material: 316L stainless steel
Pressure Connection: 9/16-18 UNF female
Transducer Weight: 285 g (10 oz) typical depending upon configuration
Cable Construction: Polyurethane jacket with double Kevlar® reinforcing stringers, fused to case, with large vent tube
Cable Pull Strength: 109 kg (240 lb)
Cable Conductors: Four 24 AWG (19/36 stranded tinned copper) with ETFE insulation; meets MIL-W-22759/16 & SAE AS22759/16
Cable Sealing: Fused to case via molded Neoprene boot rated to 610 m (2000') depth
Standard Cable Lengths (meters): 3, 4.6, 6, 7.5, 9, 12, 15, 18, 20, 22.5, 30.5, 45, and 90 for other lengths contact factory for lead times (see page 6)
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: 1) Comes complete with 5-point NIST traceable calibration certificate. 2) To order with additional cable length, specify total length in meters, additional cost for length over 3 meters. i.e. PXM709GW-001BGI-12M (12 meter cable). 3) To order with optional 0.08% FS accuracy for extra cost, insert code “-HH” after “I”. I.E. PXM709GW-3.5BGI-HH. 4) To order with ½ NPT Conduit fitting for extra cost, specifiy Model PXM709C. i.e.PXM709CGW-170HGI. 5) To order with optional Lightning/Surge protection for extra cost, specify Model PXM709LGW, i.e. PXM709LGW-001BGI.
|
|
|
Part Number Builder |
|
Option Descriptions
|
(1)
|
Termination
|
|
Select PXM709 for Waterproof Cable PXM709C for Waterproof Cable and 1/2 NPT Conduit Fitting
(2)
|
Lighting/Surge Protection (Amplified Models only)
|
|
Select GW for no protection LGW for Lightning/Surge Protection
(3)
|
Pressure Ranges
|
|
Select -025H for 20 mbar -070H for 70 mbar -170H for 170 mbar -350H for 350mbar -700H for 700 mbar -001B for 1 bar -002B for 2 bar -3.5B for 3.5bar -007B for 7 bar -010B for 10 bar -17.5B for 17.5 bar -035B for 35 bar -050B for 50 bar -070B for 70 bar
(4)
|
Pressure Type
|
|
Select G for Gage Pressure available in all ranges SG for Sealed Gage Pressure available from 7 to 70 bar A for Absolute Pressure available from 350 mbar to 70 bar
(5)
|
Output
|
|
Select V for mV/V ratiometric output 5V for 0 to 5 Vdc output 10V for 0 to 10 Vdc output I for 4 to 20 mA output
(6)
|
Accuracy Options (Standard Accuracy 0.2%)
|
|
Select for -HH for High (0.08%) Accuracy
(7)
|
Optional Cable Length (standard length 3 m)
|
|
Select for -4.5M for 4.5 m cable -6M for 6 m cable -7.5M for 7.5 m cable -9M for 9 m cable -12M for 12 m cable -15M for 15 m cable -18M for 18 m cable -20M for 19.8 m cable -22M for 22.5 m cable -30M for 30 m cable -45M for 45M cable -91M for 91 m cable
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | | | | |
|
|
|
| |
Related Links -
Related Products
|
Related Products |
|
DP24-E: |
1/8 DIN Economical Process Meter - Discontinued |
|
|
|
DP25 Series (SEE DP25B SERIES): |
Temperature, Process, Strain, pH or ORP Meters with Optional Relays, Analog Outputs and Display Options - Discontinued |
|
|
|
DP41: |
1/8 DIN High Performance Temperature, Process and Strain Meter |
|
|
|
|
|
|