|
S Series Sanitary Thermowells |
|
|
|
|
|
|
|
|
316 Stainless Steel
|
|
Bore ID 0.260 or 0.385 inch
|
|
Accepts 1/4"or 3/8" OD stems
|
|
1-1/2" Tri-Grip™ (Tri-Clamp® compatible)
|
|
Rated to 7000 PSI up to 200°F
|
|
CIP or Sanitize In Place Washdown
|
|
Finished to 32 Ra or better
|
|
1/2" NPSM Internal Thread
|
|
|
View related products - Sanitary
|
| |
|
|
|
Sanitary Thermowells are generally chosen for an application based on corrosion conditions, surface finish, mechanical size requirements, and accurate thermal transfer. Omega Sanitary Thermowells can be configured from the options below to meet your clean in place or sanitize in place application needs. This technical reference, Introduction to Sanitary Sensors contains addition application and installation details regarding the use and application of Sanitary Sensors and Sanitary Thermowells. Sanitary Sensors can be selected to match your well dimensions. See the related links below.
Most Omega temperature instrumentation with sanitary process connections can be sized and configured to fit your thermowell or CIP needs.
Food process hygienic temperature sensors and thermowells can be used to aid food safety inspection compliance and verification of time temperature control. Combined with a chart recorder model CTXL you can temperature monitor a CCP ( Critical Control Point) or sanitation time and move toward a HACCP (Hazard Analysis Critical Control Point) compliance plan.
Application: ¼ or 3/8" diameter stem,
bimetal thermometers; RTD or TC temperature
sensing instruments having 0.252"
(S-260 models) and 0.377" (S-385
models) maximum diameters,
#20-gage thermocouple elements.
Applications: Sanitary Thermowell for CIP , food and beverage,
pharmaceuticals, research.
Connection Size:
1½" Tri-Grip (Tri-Clamp®
compatible) (cap size) is
standard. Other Tri-Grip sizes
are available upon request.
Materials: 316 stainless steel.
Custom wells are also available in
special materials, other Ra or special finish, prices on request.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
|
|
|
Part Number Builder |
|
Option Descriptions
|
(1)
|
Flange Size
|
|
Select 11/2 for 1 1/2 in 2 for 2 in 21/2 for 2 1/2 in
(2)
|
Internal Diameter
|
|
Select 260 for 0.260 in internal diameter 385 for 0.385 in internal diameter
(3)
|
Shank Style and Insertion Length
|
|
Select U15/8 for No step down 1 5/8 in insertion length U21/2 for No step down 2 1/2 in insertion length U41/2 for Step down 4 1/2 in insertion length U71/2 for Step down 7 1/2 in insertion length U101/2 for Step down 10 1/2 in insertion length
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
|
| |
Related Links -
Related Products
|
|
|
|