|
|
|
|
|
|
USD$1,310.00
3/4-385W-U21/2-BRASS
|
| |
|
|
|
Application:
260W series fits standard length 1/4" diameter elements.
385W series fits standard length 3/8" diameter elements.
Connection:
3/4" or 1" nominal pipe size welding shoulder fits ASA
welding fittings, flanges, etc. Wells for larger pipe size
fittings are available upon request.
Materials:
Carbon Steel (C-1018); A.I.S.I. 304 & A.I.S.I. 316 are
standard. Other materials are available upon request.
Lagging Extension:
When specifying lagging extension, choose a length
which will permit the use of a standard element length.
(See 260L and 385L lengths.)
Series 385W
All dimensions in inches.
* NPSM internal pipe thread will accept both NPT and NPS male threads.
Pipe Size P | Model No. | P | Stem Lgth. A | Insert. Lgth. U |
3/4" Nominal (1.050" Dia.) | 3/4-385W-U 2 1/2 -U 4 1/2 -U 7 1/2 -U10 1/2 -U13 1/2 -U16 1/2 -U22 1/2 | 1.050 1.050 1.050 1.050 1.050 1.050 1.050 | 4 6 9 12 15 18 24 | 2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 16 1/2 22 1/2 |
1" Nominal (1.315" Dia.) | 1-385W-U 2 1/2 -U 4 1/2 -U 7 1/2 -U10 1/2 -U13 1/2 -U16 1/2 -U22 1/2 | 1.315 1.315 1.315 1.315 1.315 1.315 1.315 | 4 6 9 12 15 18 24 | 2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 16 1/2 22 1/2 |
Maximum Fluid Velocity—feet per second
Well Type |
Material |
Insertion Length – “U” |
2 1/2 |
4 1/2 |
7 1/2 |
10 1/2 |
13 1/2 |
16 1/2 |
22 1/2 |
3/4" - 260W | Carbon Steel | 290 (106) | 123 (71.2) | 44.9 (42.7) | 22.8 | 13.8 | 9.3 | 4.9 |
A.I.S.I. 304 & 316 | 300 (148) | 128 (99.3) | 46.4 | 23.6 | 14.3 | 9.6 | 5.1 |
1"- 260W | Carbon Steel | 290 (106) | 143 (84.3) | 51.6 (50.6) | 26.2 | 15.9 | 10.6 | 5.7 |
A.I.S.I. 304 & 316 | 300 (148) | 148 (117) | 53.5 | 27.2 | 16.5 | 11 | 5.9 |
3/4" - 385W and 1"- 385W | Carbon Steel | 426 (260) | 192 (144) | 69.5 | 35.4 | 20.5 | 14.3 | 7.7 |
A.I.S.I. 304 & 316 | 449 (360) | 199 | 71.9 | 36.6 | 21.2 | 14.8 | 8 |
Where single values appear in the velocity tables, these may be considered safe for water, steam, air or gas. In the shorter insertion
lengths, consideration is given to the velocity pressure effect of water flowing at higher velocities. The values in parentheses, therefore,
represent safe values for water flow, while the unbracketed values may be used for steam, air, gas and similar density fluids.
|
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
|
|
|
Part Number Builder |
|
Option Descriptions
|
(1)
|
External Diameter
|
|
Select 3/4 for 3/4 in. 1 for 1 in.
(2)
|
Insertion length dimension
|
|
Select 21/2 for 2 1/2 in. 41/2 for 4 1/2 in. 71/2 for 7 1/2 in. 101/2 for 10 1/2 in. 131/2 for 13 1/2 in. 161/2 for 16 1/2 in. 221/2 for 22 1/2 in.
(3)
|
Material
|
|
Select 304SS for 304 SS 316SS for 316 SS CS for Carbon Steel BRASS for Brass
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
|
| |
|
Back to top
|
|
|