|
|
|
Thermistor Probes With M12 Connections
|
Click for larger image. |
|
|
|
|
Maximum Continuous Use, 200°C (392°F) [Short Term Use to 250°C (482°F)] for Sensing End, 85°C (185°F) Max at the Connector
|
|
Vibration Tested to ASTM-E1137: 3Gs from 5 to 500 Hz
|
|
Excellent Long Term Stability
|
|
Tolerance: ±0.2°C From 0 to 70°C (32 to 158°F)
|
|
Available in 2252, 3K, 5K and 10K Ω Resistances at 25°C (77°F)
|
View related products - Thermistor Elements, Probes and Assemblies
|
| |
|
|
|
The TH-21 Series thermistor probes are constructed
with the 55000 Series glass encapsulated
thermistor elements which provide excellent
stability and accuracy.
With a maximum continuous temperature rating of
-80 to 200°C (-112 to 392°F), and intermittent
operation to 250°C (482°F), these thermistor
sensors can be used in applications previously
out of reach of epoxy coated thermistor sensors.
The probes can be ordered in any length but we
highly recommend a minimum immersion depth
of 1.5". Short probes run the risk of error due
to stem conduction effects.
Specifications
Temperature Range: -50 to 200°C (-58 to 392°F) at Sensing End
Probe Connector Temperature: 85°C (185°F) Max
Thermistor Sensor: Refer to Table 1 on next page
Operating Current: 12 micro-amps
Insulation Resistance: 100 MΩ minimum at 100 Vdc at ambient temperature
Response Time: Approximately 7 seconds (50%), 8 seconds (63.2%), 14 seconds (90%) in water flowing at 0.91 m (3') per second
External Materials: 316L stainless steel sheath and housing except connector insert
IP Rating: IP67 with mating connector installed
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: For lengths other than 6", change “-0600” in model number to required length and add $1 per inch greater than 6", (example: 9" = 0900, 41/2" = 0450). For 1/8" probe diameters, change “-1/4” in model number to “-1/8”, no additional cost. For 3K, 5K or 10K Ohm thermistor elements change “-2252” to desired resistance. •For Dual element probes, add "-DUAL" to the end of the Model Number and multiply the price by 1.75
Ordering Example: (1) TH-21A-2252-1/4-0600-M12 Straight sheath, 1/4'' diameter, 6'' long, M12 male connector, USD$3,465.00
|
|
|
Part Number Builder |
|
Option Descriptions
|
(1)
|
Design
|
|
Select A for Plain no thread B for 1/2 NPT mounting thread C for 3/8 NPT Mounting thread D for 1/4 NPT Mounting thread E for M8x1 Mounting thread F for M10x1 Mounting thread G for G1/2 mounting thread H for G1/4 mounting thread
(2)
|
Diameter
|
|
Select 1/4 for 1/4 in diameter M6 for 6 mm diameter
(3)
|
Probe Length
|
|
Select 0600 for 6 in 0150 for 150 mm
(4)
|
Additional Option
|
|
Select Nothing(leave field blank) for None -DUAL for Dual element version
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | |
|
|
|
| |
Related Links -
Related Products
|
Related Products |
|
|
|
M12CFM RTD Series: |
M12 Cables with Field Mountable Connectors for Resistance Sensors (RTDs) |
|
|
|
TH-22 Series: |
Vibration Tested High Temperature Thermistor Probes with M12 Connections |
|
|
|
|
|
|