|
|
|
|
|
|
|
3-A Approved Design, Along With ASME-BPE-2007 Mounting Flange Geometry, Insures Trouble-Free Cleanability and Interchangeabilty
|
|
Can Be Used in Sanitary, Hygienic, and Clean-In-Place Food, Dairy, Beverage and BioPharmaceutical Processes
|
|
1/4" Diameter Probe Design for Standard Duty, or 3/8" to 3/16" Stepped Probe Design For Heavy Duty Applications
|
|
Process Connection is a 1½" 16 AMP Tri-Grip (Tri-Clamp® Compatible) Standard Conforming to ASME-BPE-2007, Other Flange Diameters and Styles Available
|
|
4-Pin M12 Male Connector Standard
|
|
316L SS Wetted Surfaces with 32 µin or Better Finish
|
|
10kΩ (at 25°C) Thermistor Element (44006) Standard, 2252, 3000 5000 and 30,000 Ohm Thermistor Options Available
|
|
Thermistor Accuracy: ± 0.2°C Between 0 and 70°C.
|
|
-80 to 150°C (-112 to 302°F) Temperature Range
|
View related products - Sanitary
|
| |
|
|
|
The 3-A Approved OMEGA™ THS-S-M12 and THS-H-M12 Series
Thermistor Sensors are designed for use in Sanitary or Hygienic
Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical
industries. These sensors are manufactured with 316L stainless steel
housings that meet the dimensional requirements of ASME
BPE-2007, and are welded and processed to provide a clean,
smooth, 32 microinch or better surface finish in the wetted areas for
easy cleaning.
In addition to the standard 1½-16AMP process connection, these can be provided
in the following sizes and styles:
Process Connection | Model Number Code |
3/4"-16AMP | -B1- |
1" and 1½"-16AMP | -D1- |
2"-16AMP | -E1- |
2½"-16AMP | -F1- |
3"-16AMP | -G1- |
4"-16AMP | -H1- |
If you need a process connection that is not listed above, please contact our sales department for availability.
The probe stems are manufactured in two configurations; with a standard ¼" diameter probe for standard duty service,
and a stepped 3/8" to 3/16" probe design for good response times in heavy duty applications.
The M12 connector allows for easy connection
to your instrumentation by means of an optional extension cable. These sensors are also
available as RTD
sensing styles to accommodate a wide range of process input requirements. In addition to the
standard 1½-16AMP mounting flange, this sensor can be provided
in a variety of other flange sizes and styles. If you need something a
little (or a lot) different, we can accommodate your needs.
This sensor is stocked with the 10,000 Ω thermistor standard, but is available in any of the following resistances:
Sensor Code |
Resistance @ 25°C |
Element Series |
2K | 2252 Ω | 44004 |
3K | 3000 Ω | 44005 |
5K | 5000 Ω | 44007 |
10K | 10,000 Ω | 44006 |
30K | 30,000 Ω | 44008 |
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: For other than the standard 1½-16AMP process connection, change "-D1-" in the model number to the code for the alternate process connection option listed above the "To Order" table and add $20 to the priceFor standard duty probe lengths longer than 6", change "-0600" in model number to the required length (example: 12" = "-1200", 9¼" = "-0925") and add $1 per inch to the price (up to 24 inches).For heavy duty probe lengths longer than 6", change "-0600" in model number to the required length (example: 12" = "-1200", 9¼" = "-0925") and add $2.50 per inch to the price (up to 24 inches).For other thermistor elements, change the model number from "10K" to the desired sensor code as shown in the table above at no additional cost. For probe lengths longer then 24 inches, please contact Customer Service.
Ordering Example: (1) M12C-PUR-4-S-F-2 Cable, M12, 4-pin female, polyurethane jacket, 2 m (6.5') long, USD$650.00, plus (1) THS-10K-H-0400-D1-M12 10,000 Ohm thermistor sensor, 1½, USD$8,310.00, USD$650.00 + 8,310.00 = USD$8,960.00
|
|
|
Part Number Builder |
|
Option Descriptions
|
(1)
|
Thermistor Type
|
|
Select 10K for 10000 Ohms at 25C 2K for 2252 Ohms at 25C 3K for 3000 Ohms at 25C 5K for 5000 Ohms at 25C 30K for 30000 Ohms at 25C
(2)
|
Probe Diameter
|
|
Select S for Standard Duty 1/4 inch H for Heavy Duty 3/8 to 3/16 inch stepped probe
(3)
|
Probe Length
|
|
Select 0300 for 3 inch length 0400 for 4 inch length 0500 for 5 inch length 0600 for 6 inch length
(4)
|
Sanitary Flange (Cap) Size
|
|
Select D1 for 1-1/2 inch Tri-Grip Flange (standard) B1 for 3/4 inch 16AMP Tri-Grip Flange E1 for 2 inch 16AMP Tri-Grip Flange F1 for 2-1/2 inch 16AMP Tri-Grip Flange G1 for 3 inch 16AMP Tri-Grip Flange H1 for 4 inch 16AMP Tri-Grip Flange
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | |
|
|
|
| |
Related Links -
Related Products
|
Related Products |
|
|
|
OSTW-CC Series: |
Thermocouple Connector Standard Size Round 2 Pin includes Integral Cable Clamp Cap |
|
|
|
|
HH40: |
Ultra-High-Accuracy & Resolution Handheld Thermistor Thermometer - Discontinued |
|
|
|
DP80 Series: |
High Performance Panel Indicators with Modular Construction - Discontinued |
|
|
|
DP25-TH: |
1/8 DIN Precision Thermistor Meter/Controller |
|
|
|
|
|
450 Series: |
High Accuracy Handheld Thermometers - Discontinued |
|
|
|
Data Acquisition System Product Finder: |
Data Acquisition Product Finder - It's the easiest way to sort through our selection of data acquisition systems to find the right product for your application |
|
|
|
Handheld Meters Product Finder: |
New Handhelds Product Finder - It's the easiest way to sort through our selection of handhelds to find the right product for your application |
|
|
|
Data Loggers Product Finder: |
Datalogger Product Finder - It's the easiest way to sort through our selection of dataloggers to find the right product for your application |
|
|
|
Meters Product Finder: |
Meters Product Finder - It's the easiest way to sort through our selection of meters to find the right product for your application |
|
|
|
Temperature Controllers Product Finder: |
Temperature Controllers Product Finder - It's the easiest way to sort through our selection of temperature controllers to find the right product for your application |
|
|
|
|
|
|