|
|
|
|
|
|
USD$3,125.00
TXDIN402
|
|
Isolated & Linearized
|
|
High Accuracy with 16-Bit Conversion
|
|
TXDIN401 Temperature Transmitter Accepts Pt100 or Ni100 RTD Inputs and Types J/K/T/E/R/S/B/N Thermocouples
|
|
TXDIN402 Accepts Process Voltage, Current or Resistance Input
|
|
User Configurable via TX400-RFID (NFC) Programmer with PC software or Free Download Google App - "Direct Link"
|
|
Transmitters Have 2624 Word Non-Volatile Memory (Circular Buffer) for Data-Logging with User-Selectable Sampling Time
|
View related products - Process Measurement and Control Instruments
|
| |
|
|
|
The TXDIN401 and TXDIN402 DIN rail mount
transmitters transform a temperature or process signal
into a linearized 2-wire loop-powered 4 to 20 mA output.
Model TXDIN401 is a temperature transmitter that
accepts Pt100 or Ni100 RTD and Types J/K/T/E/R/S/B/N
thermocouples. Model TXDIN402 is a process input
transmitter that accepts voltage, current or resistance
input. The characteristics of these converters ensure
high precision on the reading scale with 16-bit
conversion. The 4 to 20 mA output can be scaled based
on the desired input range.
The programming procedure uses an RFID (NFC)
mode with the dedicated TX400-RFID programmer that
allows the user to make all calibrations and settings
quickly and without the need to power and connect
up the transmitter. Simply connect the TX400-RFID
programmer to the USB port of your PC, start the RF
Programmer configuration software and place the
transmitter on top of the TX400-RFID programmer
to establish communications. These transmitters are
also provided with a data logging function for the
input signal. Transmitters have a non-volatile memory
(circular buffer) for data-logging with user-selectable
sampling time. The user selects the sampling time
(1 to 3600 seconds) and then each time the 4 to
20 mA loop powers the device, the input value is
stored to non-volatile memory.
An additional programming tool is the Omega Brand Google App - "Direct Link" relying on RFID/NFC connectivity and allowing straightforward programming without wirings by Android devices.
Using the TX400-RFID programmer along with the
RF Programmer configuration software (software is
a free download from OMEGA) the user can:
• Completely configure the transmitter including
scaling the 4 to 20 mA output to desired input range
• Implement field calibration to compensate for gain
and offset errors
• Download logged data to PC for visualization and printing
Specifications
RTD Input Types and Ranges (TXDIN401 Only)
Pt100 (a = 0.00385): 2, 3, or 4-wire connection,
-200 to 600°C (-328 to 1112°F)
Ni100 (a = 0.00618): 2, 3, or 4-wire connection,
-60 to 180°C (-76 to 356°F)
Thermocouple Input Types (TXDIN401 Only): J/K/T/E/R/S/B/N/mV
Process Input Types and Ranges (TXDIN402 Only):
Voltage: 0 to 10 V
Current: 0 to 20 mA (4 to 20 mA default)
Resistance: 0 to 4000 Ω
Output Resolution: 2 µA
Over-Range Output: fs + 5°C
Under-Range Output: fs - 5°C
Output Error (Failure): Selectable between 21 mA or 3.8 mA
Current Output Protection: 30 mA approx
Rejection: 50 to 60 Hz
Maximum Transmission Error: 0.1% FS or 0.2°C whichever
is greater
Sampling Time: 300 msec
Response Time (10 to 90%): 600 msec
Non-Volatile Memory (Circular Buffer) for Data Logging: 2624 word
Cable Resistance: 20 Ω max
Temperature Coefficient: < 100 ppm
Power: 2-wire loop powered; operating range 6 to 32 Vdc
Isolation: Galvanic, 1 KVac input/output
Operating Environment: -40 to 85°C (-40 to 185°F),
30 to 90% RH (non condensing)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Mounting: 3 mm DIN rail
Material: Enclosure, polycarbonate; front panel, silicone
Enclosure Rating: NEMA 1 (IP20) according to CE, EN 61000-6-4, EN 61000-6-2
Programming: Wireless with RFID technology (NFC)
Software: Windows® XP/7/8 (32-bit and 64-bit), Windows 10 (64-bit)
Connection: Screw terminals
Weight: 30 g (1.05 oz) approx
Dimensions: 90 H x 18 W x 64 mm D (3.54 x 0.71 x 2.52")
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: TX400-RFID programmer is supplied with complete User Guide and USB interface cable. TXDIN401 and TXDIN402 transmitters are supplied with complete User Guide. The RF programmer PC configuration software is a free download from OMEGA.
Google App "Direct Link" can be free downloaded from Google Store or get a copy from our software link here.
Ordering Example: (1) TX400-RFID RFID programmer, USD$6,435.00, plus (1) TXDIN401 DIN rail mount RFID temperature transmitter, USD$4,495.00, USD$6,435.00 + 4,495.00 = USD$10,930.00
|
|
|
|
|
| |
Related Links -
Manual, Software, Related Products
|
Product Manual |
Download DIN Rail Mount TC/RTD Input Tranmsitter RFID |
Download DIN Rail Mount Voltage/Current/Resistance Input Transmitter RFID |
Download RF Programmer for TX400, TXDIN400 Series |
Software |
Download RF Programmer Software for TX400 and TXDIN400 |
Download Omega Brand NFC Apps – Direct Link |
Related Products |
|
TX400-Series: |
Miniature Head Mount Temperature Transmitters with RFID Communications |
|
|
|
|
|
|