|
|
|
Laboratory Grade Benchtop Wind-Tunnel with Instrumentation
|
Click for larger image. |
|
|
USD$756,310.00
WT4401-D
|
|
Precise Motor Control for Adjusting Flow Rates
|
|
NIST Calibration Supplied with Each Wind Tunnel
|
|
Highly Accurate to 1% of Reading
|
|
Large 4" by 4" Test Chamber
|
|
Highly Stable Delta Pressure Sensor and Readout Included with Each Wind Tunnel
|
|
Fully Instrumented
|
|
Optional Environmental Monitoring Package of Temp, Humidity, Barometric Pressure and Delta P Available
|
View related products - Instrumentation for Pressure and Strain Measurements
|
| |
|
|
|
OMEGA’s state-of-the-art wind tunnel is designed to give a highly uniform flow rate over a 152 mm (6") test section. A
powerful 12 amp motor with variable speed from 0 to 10,000 RPM is adjustable to give a particular flowrate by a precise
motor control unit. Each wind tunnel is supplied with an NIST traceable certificate.
The uniform flowrate is determined by monitoring a highly repeatable differential pressure sensor which has been calibrated
to each individual wind tunnel as a system. Each wind tunnel is supplied with two restrictive plates for achieving
optimum low flowrates. The established differential pressure measurements versus flowrates are listed from 25 to 9000 FPM.
Calibration sheets are included, which makes calibrating different flow sensors simple.
The differential pressure measurement used to establish known flowrates will be affected by barometric pressure and
temperature conditions during testing. Depending on the probe being calibrated, humidity may also be a factor.
OMEGA’s enhanced wind tunnel package is an environmental monitoring system that measures barometric pressure, room
temperature, humidity and differential pressure. By monitoring room conditions, standard differential pressures can be
converted to actual differential pressure readings to ensure accurate flowrates.
For testing different probes, a 1/2 NPT connection is available. An assortment of compression fittings is provided to
help mount the probe under calibration.
High Performance Package:
Same differential system as standard model, plus HX97-A temperature and humidity sensor, PX02C1-16A5T barometric sensor,
PSS-D15B power supply, three DP25-E panel meters, and one DP41B-S panel meter. All equipment is enclosed in a heavy duty,
air cooled, benchtop metal case. All 4 meters have 0 to 10 Vdc analog outputs.
Wind tunnels come complete with 1/8, 3/16, 1/4 and 3/8" brass compression fittings with PTFE ferrules, two 1.52 m (5')
lengths of silicone tubing, operator's manual with NIST calibration data and pressure sensor with benchtop meter.
The intake air flow passage to this precise wind tunnel is a fiberglassconstructed baffle. The honeycomb baffle design
ensures constant and evenly distributed air intake. The design minimizes turbulent air flow created by movement in front
of the intake. The rear portion of the intake baffle has a profile design that keeps the stream uniform, while decreasing the
area to a 101.6 x 101.6 mm (4 x 4") cross- section.
The test chamber is 101.6 x 101.6 x 152 mm (4 x 4 x 6") and is constructed of clear, thick-wall plastic for easy viewing.
In back of this test section, the motor pulls the air through the wind tunnel. The motor and intake profiles utilize
fiberglass construction, which minimizes airflow distortion.
A monitoring package keeps track of ambient conditions as well as the precise differential pressure measurement. The
monitoring sensors and instruments are all packaged inside a single powerful housing. Each sensor has an analog output
for use with a strip chart recorder or computer data logging system. Humidity, temperature and barometric sensors are
enclosed in the benchtop case for monitoring atmospheric conditions which can influence the exact air speed. The
differential pressure cell is connected to the wind tunnel via silicone.
SPECIFICATIONS
Wind Tunnel
Accuracy: 1% rdg (2% rdg with restrictive plates)
Flow Rates: 25 to 9000 fpm (0.15 to 45 m/s)
Noise: 95 dBA max.
Size: 1.5 m L x 431.8 mm H (5' x 17")
Motor
Power: 120 Vac
Current: 12 amps
Speed: 10,000 RPM
Motor Control Box
Power: 120 Vac
Speed Adj.: 10 turn pot.
Internal Adj.: Min, Max, acceleration and current limit
Size: 140 W x 184 L x 89 mm H (5.53 x 7.25 x 3.5")
Weight:
Wind tunnel: 22.5 kg (49.5 lb)
Standard elec. 3.2 kg (7 lb)
Deluxe elec. 7 kg (15.3 lb)
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: The wind tunnel comes complete with everything you need to calibrate probes quickly. All accessories, NIST documents, manuals, fitting, etc. are supplied for most any application.
Ordering Example: (1) WT4401-D wind tunnel with enhanced instrumentation package, USD$756,310.00
|
|
|
|
|
| |
Related Links -
Related Products
|
Related Products |
|
WT4401-D: |
Product Video Laboratory Grade Benchtop Wind-Tunnel with Instrumentation |
|
|
|
|
|
|
|